Dissipating Culvert End Design for Erosion Control Using CFD Platform FLOW-3D Numerical Simulation Modeling
Authors:
- 1 February 2023
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Pipeline Systems Engineering and Practice
- Vol. 14 (1) , 04022064
Abstract
Downstream erosion and scouring caused by high-velocity flow issuing from culvert ends are one of the main problems faced by hydraulic engineers. The main objective of this paper was to develop a dissipating culvert end design that can reduce the risk of downstream erosion and scour caused by high-velocity flow issuing from typical culvert ends. For this purpose, the computational fluid dynamics (CFD) platform FLOW-3D version 11.1.0 code was calibrated and validated based on the experimental runs [coefficient of determination and root mean square error ]. Two alternative dissipating culvert end designs (ALT 1 and ALT 2) were then developed using the code, and their potential in mitigation of downstream erosion and scouring was analyzed. The issuing flow velocity and kinetic energy for each were measured and compared with typical culvert end (control) flow. According to the results, mass averaged fluid mean kinetic energy in the control flow was recorded at and was measured at 0.83 and in ALT 1 and ALT 2 flows, respectively. Accordingly, the removal of downstream sandbox mass under control flow was approximately 11.1% and 4.2% higher compared with ALT 1 and ALT 2 flows, respectively. FLOW-3D code can be used to predict culvert end flow and downstream erosion and to design potential dissipating culvert ends that can reduce downstream erosion.
Keywords
This publication has 26 references indexed in Scilit:
- ANFIS-Based Approach for Predicting the Scour Depth at Culvert OutletsJournal of Pipeline Systems Engineering and Practice, 2011
- Culvert Information Management SystemTransportation Research Record: Journal of the Transportation Research Board, 2009
- Numerical analysis of free flow past a sluice gateKSCE Journal of Civil Engineering, 2007
- Heritage and early history of the boundary element methodEngineering Analysis with Boundary Elements, 2005
- Computational modeling of flow over an ogee spillwayComputers & Structures, 2004
- Particle Densimetric Froude Number for Estimating Sediment TransportJournal of Hydraulic Engineering, 2003
- Sediment Transport, Part II: Suspended Load TransportJournal of Hydraulic Engineering, 1984
- Sediment Transport, Part I: Bed Load TransportJournal of Hydraulic Engineering, 1984
- Volume of fluid (VOF) method for the dynamics of free boundariesJournal of Computational Physics, 1981
- Towards the ultimate conservative difference scheme III. Upstream-centered finite-difference schemes for ideal compressible flowJournal of Computational Physics, 1977