Influence of seed layers on optical properties of aluminum in the UV range
Open Access
- 24 June 2020
- journal article
- research article
- Published by Optica Publishing Group in Optics Express
- Vol. 28 (14) , 20324-20333
Abstract
The potential of titanium and copper seed layers to enhance the optical properties of aluminum films for ultra-violet (UV) applications is analyzed. The seed layers significantly influence the initial layer growth of aluminum films. For the titanium-seeded aluminum, a surface roughness of 0.34 nm was observed. UV spectral reflectance measurements showed an average higher reflectivity of 4.8% for wavelengths from 120 nm to 200 nm for the aluminum film grown on the titanium seed layer. Furthermore, the titanium-seeded aluminum coatings were stable at an elevated temperature of 225°C and showed no increase in surface roughness or pinholes.Keywords
This publication has 31 references indexed in Scilit:
- Wetting and spreadingReviews of Modern Physics, 2009
- Ultrasmooth Silver Thin Films Deposited with a Germanium Nucleation LayerNano Letters, 2008
- Far ultraviolet optical properties of MgF2 films deposited by ion-beam sputtering and their application as protective coatings for AlOptics Communications, 2003
- Optical constants of lithium fluoride thin films in the far ultravioletJournal of the Optical Society of America B, 2000
- Morphology of thin silver film grown by dc sputtering on Si(001)Journal of Physics D: Applied Physics, 1998
- The microstructure of aluminium thin films on amorphous SiO2Thin Solid Films, 1986
- Reflective multilayer coatings for the far uv regionApplied Optics, 1976
- Influence of Grain Boundaries and Lattice Defects on the Optical Properties of Some MetalsPhysical Review B, 1973
- Correlation between film structure and sorption behaviour of vapour deposited ZnS, cryolite and MgF2 filmsThin Solid Films, 1972
- Reflecting Coatings for the Extreme Ultraviolet*Journal of the Optical Society of America, 1959