Development and Validation of a Quasi-Dimensional Model for HCCI Engine Performance and Emissions Studies Under Turbocharged Conditions
Authors:
- Scott B. FivelandSFScott B. Fiveland
- Dennis N. AssanisDADennis N. Assanis
- 6 May 2002
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
A PC-based, computationally-efficient, quasi-dimensional simulation of HCCI engine performance and emissions has been developed with the intent to bridge the gap between zero-dimensional and sequential fluid-mechanic - thermo-kinetic models. The model couples a detailed chemistry description, a core gas model, a predictive boundary layer model, and a ring-dynamics crevice flow model. The thermal boundary layer, which is axially discretized to account for the relative piston motion, is modeled using compressible energy arguments. The ring-pack crevice zone is modeled using a coupled ring dynamic and flow model. The physically-based mathematical model is solved within the context of a single simulation framework, which lends to flexibility and expediency in performing a range of parametric studies. The simulation was validated under turbo-charged conditions using data obtained from a Caterpillar 3500 test engine. Predictions of engine combustion and performance were found to be in very satisfactory agreement with experimental data. It was also shown that the simulation can predict emissions of unburned hydrocarbons (UHC) within 10-20% and carbon monoxides (CO) within 50% over a range of turbocharged engine conditions.Keywords
This publication has 42 references indexed in Scilit:
- Modeling of chemical and mixing effects on methane autoignition under direct-injection, stratified charged conditionsProceedings of the Combustion Institute, 2002
- Sensitivity of Natural Gas HCCI Combustion to Fuel and Operating Parameters Using Detailed Kinetic Modeling1999
- Compression Ratio Effect on Methane HCCI CombustionJournal of Engineering for Gas Turbines and Power, 1999
- A temperature wall function formulation for variable-density turbulent flows with application to engine convective heat transfer modelingInternational Journal of Heat and Mass Transfer, 1997
- Effect of Ring Dynamics and Crevice Flows on Unburned Hydrocarbon EmissionsJournal of Engineering for Gas Turbines and Power, 1994
- Thermal boundary layer thickness in the cylinder of a spark-ignition engineInternational Journal of Heat and Mass Transfer, 1984
- Thermal boundary layer in a gas subject to a time dependent pressureLetters in Heat and Mass Transfer, 1981
- A Fundamental Model for Predicting Fuel Consumption, NOxand HC Emissions of the Conventional Spark-Ignited EngineCombustion Science and Technology, 1980
- Phenomenological models for reciprocating internal combustion enginesProgress in Energy and Combustion Science, 1979
- Approximate Relationships for the Thermodynamic Properties of Hydrocarbon-Air Combustion ProductsCombustion Science and Technology, 1977