DOE-based experimental investigation and optimization of hardness and corrosion rate for Cu-x%Al2O3 as processed by powder metallurgy
Authors:
- Omar BatainehOBOmar Bataineh
- Abdullah F. Al-DwairiAAAbdullah F. Al-Dwairi
- Zaid AyoubZAZaid Ayoub
- Mohammad Al-OmoshMAMohammad Al-Omosh
Open Access
- 1 January 2021
- journal article
- research article
- Published by American Institute of Mathematical Sciences (AIMS) in AIMS Materials Science
- Vol. 8 (3) , 416-433
Abstract
Copper alumina (Cu-x%Al2O3) was prepared from micro-sized powder particles through the powder metallurgy (PM) process. Experimental runs were designed according to the design of experiments (DOE) methodology to investigate the effect of alumina concentration and sintering time on the hardness and corrosion rate of the powdered composite. Four sintering times were tested (1, 2, 3, and 4 h) in combination with different levels of alumina concentration (1 wt%, 3 wt%, 6 wt%, and 10 wt%). Given the narrow range of the sintering temperature for copper alumina, this temperature was fixed at 900 ℃, whereas the compaction pressure was set at 300 MPa. Collected data were analysed based on the analysis of variance (ANOVA) approach and complemented with microscopic analysis. Optimization techniques were used to identify the optimal settings of sintering time and alumina concentration for the PM composite.Keywords
This publication has 30 references indexed in Scilit:
- Mechanical and tribological behavior of nanostructured copper–alumina cermets obtained by Pulsed Electric Current SinteringWear, 2012
- Catalytic characteristics of a copper–alumina nanocomposite formed by the mechanochemical routeReaction Kinetics, Mechanisms and Catalysis, 2012
- Analysis of Design of Experiments Methodology for Optimization of Pulsed Current GTAW Process Parameters for Ultimate Tensile Strength of UNS S32760 WeldsMetallography, Microstructure, and Analysis, 2012
- Wear behaviour of interpenetrating alumina–copper compositesWear, 2011
- Sintered materials based on copper and alumina powders synthesized by a novel methodScience of Sintering, 2010
- Strategy for optimising cutting parameters in the dry turning of 6061-T6 aluminium alloy based on design of experiments and the generalised pattern search algorithmInternational Journal of Machining and Machinability of Materials, 2010
- Manufacturing nano-alumina particle-reinforced copper alloy by explosive compactionJournal of Alloys and Compounds, 2009
- Development of copper:alumina Metal Matrix Composite by Powder Metallurgy methodInternational Journal of Materials and Product Technology, 2008
- Sequential deposition of copper/alumina compositesJournal of Materials Science, 2005
- Role of Oxygen in Bonding Copper to AluminaJournal of the American Ceramic Society, 1989