Bulk Polymer-Derived Ceramic Composites of Graphene Oxide
Authors:
Open Access
- 10 April 2018
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 3 (4) , 4006-4016
Abstract
Bulk polymer-derived ceramic (PDC) composites of SiCO with an embedded graphene network were produced using graphene-coated poly(vinyl alcohol) (PVA) foams as templates. The pyrolysis of green bodies containing cross-linked polysiloxane, PVA foams, and graphene oxide (GO) resulted in the decomposition of PVA foams, compression of GO layers, and formation of graphitic domains adjacent to GO within the SiCO composite, leading to SiCO composites with an embedded graphene network. The SiCO/GO composite, with about 1.5% GO in the ceramic matrix, offered an increase in the electrical conductivity by more than 4 orders of magnitude compared to that of pure SiCO ceramics. Additionally, the unique graphene network in the SiCO demonstrated a drop in the observed thermal conductivity of the composite (∼0.8 W m–1 K–1). Young’s modulus of the as-fabricated SiCO/GO composites was found to be around 210 MPa, which is notably higher than the reported values for similar composites fabricated from only ceramic precursors and PVA foams. The present approach demonstrates a facile and cost-effective method of producing bulk PDC composites with high electrical conductivity, good thermal stability, and low thermal conductivity.Keywords
Funding Information
- National Aeronautics and Space Administration (NNX16AM88H)
- Garmor Inc.
This publication has 84 references indexed in Scilit:
- Luminescent graphene quantum dots fabricated by pulsed laser synthesisCarbon, 2013
- High performance environmental barrier coatings, Part I: Passive filler loaded SiCN system for steelJournal of the European Ceramic Society, 2011
- Low-temperature synthesis of graphene on nickel foil by microwave plasma chemical vapor depositionApplied Physics Letters, 2011
- Remarkable selective localization of modified nanoscaled carbon black and positive temperature coefficient effect in binary-polymer matrix compositesJournal of Materials Chemistry, 2008
- Simulations on the Thermal Decomposition of a Poly(dimethylsiloxane) Polymer Using the ReaxFF Reactive Force FieldJournal of the American Chemical Society, 2005
- Laboratory‐based electrical conductivity in the Earth's mantleJournal of Geophysical Research, 2000
- Interpretation of Raman spectra of disordered and amorphous carbonPhysical Review B, 2000
- Fabrication of Lead Zirconate Titanate Microrods for 1–3 Piezocomposites Using Hot Isostatic Pressing with Silicon MoldsJournal of the American Ceramic Society, 1999
- 29Si MAS NMR investigation of the pyrolysis process of cross-linked polysiloxanes prepared from polymethylhydrosiloxaneJournal of Materials Chemistry, 1996
- Spin coating process of sol-gel silicate films deposition: Effect of spin speed and processing temperatureJournal of Sol-Gel Science and Technology, 1995