The Manufacture and Performance of Polyethylene‐Polyisobutylene Films for Cling Applications
Authors:
- 1 January 2003
- journal article
- research article
- Published by Wiley in Developments in Chemical Engineering and Mineral Processing
- Vol. 11 (1-2) , 169-184
Abstract
A range of Linear Low Density Polyethylene (LLDPE) films with polyisobutylene (PIB) content from 2%‐8% was manufactured using a Killion blown film extrusion system and a cast film extrusion system. The films were aged at 25°, 35° and 45° for up 28 days, to enable tack (cling) development. The tack, in both blown and cast films, improved significantly with ageing, at increased storage temperatures and at higher film blow up ratios. FTIR/ATR analysis was used to investigate the surface migration of PIB in the cast films. The results confirmed those determined by mechanical tack (cling) analysis. DSC analysis showed only a slight decrease in film crystallinity with increasing PIB concentration. The film tensile modulus, elongation and tear properties in both MD and TD were not significantly affected by increase in PIB concentration.A second series of films with 8% PIB content was manufactured from a range of LLDPE'S. FTIR/ATR, DSC and mechanical tack analysis were used to investigate the relationship between polymer properties and migration rates. The study established that crystallinity was the most influential factor governing PIB migration and this could be related to polymer density. Co‐monomer type was found not to be a factor influencing migration of PIB.Keywords
This publication has 12 references indexed in Scilit:
- Crystallization of low-density polyethylene- and linear low-density polyethylene-rich blendsJournal of Applied Polymer Science, 2000
- Melt strength and film bubble instability of LLDPE/LDPE blendsPolymer International, 1999
- An attenuated total reflectance cell for analysis of small molecule diffusion in polymer thin films with Fourier-transform infrared spectroscopyPolymer, 1998
- Self-adhesive stretching polyethylene foilMaterials Letters, 1997
- Analysis of diffusion in polymers using evanescent field spectroscopyAIChE Journal, 1995
- Effects of cast film fabrication variables on structure development and key stretch film propertiesJournal of Applied Polymer Science, 1994
- The use of FTi.r.-a.t.r. spectroscopy to characterize penetrant diffusion in polymersPolymer, 1993
- Migration of polyisobutylene from polyethylene/polyisobutylene films into foods during domestic and microwave oven useFood Additives & Contaminants, 1992
- Solubility of gases in polyethyleneJournal of Polymer Science, 1961
- Sorption and flow of gases in polyethyleneJournal of Polymer Science, 1959