Residual Axial Bearing Capacity of Concrete-Filled Circular Steel Tubular Columns (CFCSTCs) after Transverse Impact
Open Access
- 16 May 2018
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 8 (5) , 793
Abstract
The purpose of this research is to study the effect of both transverse impact, and ratio of outer diameter to thickness of outer steel tube (D/t), on the residual axial bearing capacity of concrete-filled circular steel tubular columns (CFCSTCs). A total of sixteen samples, including four samples left untreated for comparison, are experimentally studied to investigate the effect of both drop-hammer transverse impact height (H), and D/t ratio, on the residual axial bearing capacity of CFCSTCs. The failure mode, load-displacement curves, load-strain curves, and residual axial bearing capacity of those samples are extensively investigated. A finite element analysis (FEA) model is established to predict the effect of D/t ratio on the residual axial bearing capacity of CFCSTCs. The results indicate that the H and the D/t ratio have noticeable effects on the axial compression performance of CFCSTCs. Failure mode of samples is commonly local buckling. In addition, maximum reduction of the axial bearing capacity of columns reaches about 35% compared with that of untreated columns. The results also show that the bearing capacity of the column increases with a decreasing D/t ratio of the same diameter (D).Keywords
Funding Information
- National Natural Science Foundation of China (51778064)
- Petroleum Science and Technology Innovation Foundation of China (2016D-5007-0605)
- Natural Science Foundation of Hubei City, China (2016CFA022)
This publication has 47 references indexed in Scilit:
- Finite element modelling of concrete-filled steel stub columns under axial compressionJournal of Constructional Steel Research, 2013
- Behavior of FRP-Confined Normal- and High-Strength Concrete under Cyclic Axial CompressionJournal of Composites for Construction, 2012
- Design of hollow and concrete filled steel and stainless steel tubular columns for transverse impact loadsThin-Walled Structures, 2011
- Hollow and concrete filled steel hollow sections under transverse impact loadsEngineering Structures, 2008
- Concrete-filled double skin steel tubular (CFDST) beam–columns subjected to cyclic bendingEngineering Structures, 2006
- Axial capacity of circular concrete-filled tube columnsJournal of Constructional Steel Research, 2004
- Behavior of Centrally Loaded Concrete-Filled Steel-Tube Short ColumnsJournal of Structural Engineering, 2004
- Experimental Behavior of High Strength Square Concrete-Filled Steel Tube Beam-ColumnsJournal of Structural Engineering, 2002
- Design of Circular Thin-Walled Concrete Filled Steel TubesJournal of Structural Engineering, 2000
- Friction Coefficient of Steel on Concrete or GroutJournal of Structural Engineering, 1985