Microscale evaluation of mechanical properties of friction stir welded A6061 aluminium alloy/304 stainless steel dissimilar lap joint
Authors:
- 1 February 2013
- journal article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 18 (2) , 108-113
Abstract
Microscale evaluation of the mechanical properties of a friction stir welded A6061/SUS 304 grooved lap joint was performed using a microtensile test and transmission electron microscopy. The microtensile test revealed that ∼62% of the area along which the rotating tool passed the specimen was regarded as the bonded region and that the joint was fractured at the A6061 matrix owing to the formation of very thin interfacial reaction layers. Equiaxed aluminium grains were observed at the interface of the specimen after it was fractured, indicating that the interface deformed only slightly during the microtensile test. It should be noted that although the maximum tensile strength of the joint was approximately the same as that of the base alloy, the proof stress of the joint decreased with the dissolution of the β″ phase in the A6061 aluminium alloy.Keywords
This publication has 22 references indexed in Scilit:
- Nanoindentation Measurement of Interfacial Reaction Layers in 6000 Series Aluminum Alloys and Steel Dissimilar Metal Joints with Alloying ElementsMATERIALS TRANSACTIONS, 2011
- Characteristics and Estimation of Interfacial Microstructure with Additional Elements in Dissimilar Metal Joints of Aluminum Alloys to SteelQUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 2009
- Microstructure and Mechanical Properties of an AA6181‐T4 Aluminium Alloy to HC340LA High Strength Steel Friction Stir Overlap WeldAdvanced Engineering Materials, 2008
- Spot Welding between Aluminum Alloy and Zn Coated Steel by Friction StirringQUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 2008
- Interfacial reaction in steel–aluminum joints made by friction stir weldingScripta Materialia, 2006
- Friction-Stir-Welded Lap Joint of Aluminum to Zinc-Coated SteelQUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 2005
- Joining of Al 6061 alloy to AISI 1018 steel by combined effects of fusion and solid state weldingInternational Journal of Machine Tools and Manufacture, 2004
- Precipitation hardening in Al–Mg–Si alloys with and without excess SiMaterials Science and Engineering: A, 2001
- Light-weight structures produced by laser beam joining for future applications in automobile and aerospace industryJournal of Materials Processing Technology, 2001
- Recent studies on aging phenomena of 6000 series aluminum alloysJournal of Japan Institute of Light Metals, 2000