Nucleation mechanisms in chemically vapor-deposited mullite coatings on SiC
Authors:
- 1 July 1999
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 14 (7) , 2952-2958
Abstract
Dense, uniform, and adherent chemically vapor-deposited mullite coatings were deposited on SiC substrates using the AlCl3–SiCl4–H2–CO2 system. Typical coating morphology consisted of a thin interfacial layer of γ–Al2O3 nanocrystallites embedded within a vitreous SiO2-based matrix. When a critical Al/Si ratio of 3.2 ± 0.29 was reached within this nanocrystalline layer, mullite crystals nucleated and grew as columnar grains. The thickness of the nanocrystalline layer decreased as the input AlCl3/SiCl4 ratio was increased. In all cases, the Al/Si composition in the coating increased from the coating/substrate interface to the coating surface. Critical factors leading to the nucleation and growth of mullite crystals are discussed in this article.Keywords
This publication has 4 references indexed in Scilit:
- Mullite Precursor Part I. Characterization of Mullite Precursor Formed by a Reaction of Monosilicic Acid on Aluminum HydroxideJournal of Materials Research, 1997
- Structure of mullite coatings grown by chemical vapor depositionMaterials Science and Engineering: A, 1997
- Synthesis of mullite coatings by chemical vapor depositionJournal of Materials Research, 1996
- Direct Observation of Oxygen Vacancy in Mullite, 1.86Al2O3•SiO2 by High Resolution Electron MicroscopyProceedings of the Japan Academy, 1975