R455A Refrigerant as a Prospective Working Fluid in Refrigeration Systems for Gastronomy Furnishings
Open Access
Abstract
The general development of technology and universal access means that gastronomy furnishings can be found in every corner of the world. Therefore, it is important to develop these devices and the machines that constitute them. We are talking about refrigeration systems located inside gastronomy furnishings. The R404A refrigerant, popular in recent years, is being withdrawn from use due to its harmful impact on the environment. Modern synthetic refrigerants or natural refrigerants can be used as alternative substances. In modern solutions, it is expected that devices and all cooperating elements have the lowest possible harmful impact on the environment and the user while, at the same time, having the highest possible energy efficiency. First, tests were carried out with the R404A refrigerant. Then, the working medium was replaced without changing any element of the refrigeration system with the modern R455A refrigerant. The system was tested in terms of the operating parameters achieved and in terms of electricity consumption. It was found that there is an alternative R455A refrigerant operating in the refrigeration system of catering furnishings, which provides the system with an average of 34% better energy efficiency than the reference refrigerant R404A. It was also found that the time needed to achieve the set working conditions decreased. An alternative refrigerant allows a refrigeration system to be built based on components available on the market or one that can be used as a direct replacement for the old refrigerant.Keywords
Funding Information
- Institute of Work Machines and Motor Vehicles of the Poznań University of Technology
This publication has 18 references indexed in Scilit:
- Energy impact evaluation of different low-GWP alternatives to replace R134a in a beverage cooler. Experimental analysis and optimization for the pure refrigerants R152a, R1234yf, R290, R1270, R600a and R744Energy Conversion and Management, 2022
- Experimental investigation on the low-GWP HFC/HFO blends R454A and R454C in a R404A refrigeration systemInternational Journal of Refrigeration, 2021
- Flow boiling heat transfer and pressure drop data of non-azeotropic mixture R455A in a horizontal 6.0 mm stainless-steel tubeInternational Journal of Refrigeration, 2020
- TEWI analysis of a stand-alone refrigeration system using low-GWP fluids with leakage ratio considerationInternational Journal of Refrigeration, 2020
- Performance assessment of an ejector enhanced dual temperature refrigeration cycle for domestic refrigerator applicationApplied Thermal Engineering, 2020
- Overview of low GWP mixtures for the replacement of HFC refrigerants: R134a, R404A and R410AInternational Journal of Refrigeration, 2020
- R-454C, R-459B, R-457A and R-455A as low-GWP replacements of R-404A: Experimental evaluation and optimizationInternational Journal of Refrigeration, 2019
- HFOs and their binary mixtures with HFC134a working as drop-in refrigerant in a household refrigerator: Energy analysis and environmental impact assessmentApplied Thermal Engineering, 2018
- Experimental drop-in replacement of R404A for warm countries using the low GWP mixtures R454C and R455AInternational Journal of Refrigeration, 2018
- Theoretical comparison of low GWP alternatives for different refrigeration configurations taking R404A as baselineInternational Journal of Refrigeration, 2014