Effects of Unidirection/Bidirection Torsional Thermomechanical Processes on Grain Boundary Characteristics and Plasticity of Pure Nickel
Open Access
Abstract
The “torsion and annealing” grain boundary modification of pure nickel wires with different diameters was carried out in this paper. The effects of torsional cycles as well as unidirectional/bidirectional torsion methods on grain boundary characteristic distribution and plasticity were investigated. The fraction of special boundaries, grain boundary characteristic distributions and grain orientations of samples with different torsion parameters were detected by electron backscatter diffraction. Hardness measurement was conducted to characterize the plasticity. Then, the relationship between micro grain boundary characteristics and macro plasticity was explored. It was found that the special boundaries, especially Σ3 boundaries, are increased after torsion and annealing and effectively broke the random boundary network. The bidirectional torsion with small torsional circulation unit was the most conducive way to improve the fraction of special boundaries. The experiments also showed that there was a good linear correlation between the fraction of special boundaries and hardness. The plasticization mechanism was that plenty of grains with Σ3 boundaries, [001] orientations and small Taylor factor were generated in the thermomechanical processes. Meanwhile, the special boundaries broke the random boundary network. Therefore, the material was able to achieve greater plastic deformation. Moreover, the mechanism of torsion and annealing on the plasticity of pure nickel was illustrated, which provides theoretical guidance for the pre-plasticization of nickel workpieces.Keywords
Funding Information
- National Natural Science Foundation of China (51775311)
This publication has 28 references indexed in Scilit:
- Effects of recovery treatment after large strain on the grain boundary character distributions of subsequently cold rolled and annealed Pb–Ca–Sn–Al alloyMaterials Science and Engineering: A, 2008
- Orientation Distribution of Σ3 Grain Boundary Planes in Ni before and after Grain Boundary EngineeringMaterials Science Forum, 2007
- A study on the effect of cold rolling and annealing on special grain boundary fractions in commercial-purity nickelMaterials Science and Engineering: A, 2005
- Universal features of grain boundary networks in FCC materialsJournal of Materials Science, 2005
- The effect of single-step low strain and annealing of nickel on grain boundary characterMaterials Science and Engineering: A, 2005
- Toughening of brittle materials by grain boundary engineeringMaterials Science and Engineering: A, 2004
- Twinning-related grain boundary engineeringActa Materialia, 2004
- The relationship between the fracture toughness and grain boundary character distribution in polycrystalline NiAlIntermetallics, 2003
- “Fine tuning” at Σ3n boundaries in nickelActa Materialia, 1997
- Aspects of twinning and grain growth in high purity and commercially pure nickelMaterials Science and Engineering: A, 1995