Metallization by Sputtering to Improve the Bond Strength between Zirconia Ceramics and Resin Cements
Open Access
- 17 November 2021
- journal article
- research article
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 12 (4) , 62
Abstract
Zirconia has been used as a prosthesis material for over a decade because of its excellent mechanical properties and esthetics. The surface treatment for zirconia generally involves sandblasting and the application of primers for favorable bond strength between the surface and resin. However, sandblasting causes the microcracking and chipping of the zirconia surface. To overcome these challenges, the metallization of the zirconia surface was performed. Ti and Au were sputtered on yttria stabilized zirconia (YSZ) disks and heated to 800 °C for 15 min in air. These disks were bonded to stainless-steel rods using resin cement. Then, shear bond strength tests were performed using an Instron-type testing machine. The shear bond strength of the Ti sputtering group was significantly higher than that of the other groups. According to the results of X-ray photoelectron spectroscopy and electron probe microanalysis, the Ti-sputtered YSZ surface contained both sub-titanium oxide and titanium oxide before heating. Sub-titanium oxide was converted to titanium oxide by heating. These results suggest that metallization using Ti is effective for zirconia surface treatment to improve the shear bond strength between YSZ and resin cement. This metallization technique for YSZ has potential in clinical applications.Keywords
This publication has 36 references indexed in Scilit:
- Joining of zirconia mechanically metallized with titaniumCerâmica, 2010
- Three-year clinical prospective evaluation of zirconia-based posterior fixed dental prostheses (FDPs)Clinical Oral Investigations, 2009
- High-strength CAD/CAM-fabricated veneering material sintered to zirconia copings — A new fabrication mode for all-ceramic restorationsDental Materials, 2009
- Brazing of Stainless Steel to Yttria‐Stabilized Zirconia Using Gold‐Based Brazes for Solid Oxide Fuel Cell ApplicationsInternational Journal of Applied Ceramic Technology, 2007
- The aesthetics of all-ceramic veneered and monolithic CAD/CAM crownsJournal of Oral Rehabilitation, 2005
- X2005
- Fatigue sensitivity of Y‐TZP to microscale sharp‐contact flawsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2004
- Effect of thermocycling on the shear bond strength of a cyanoacrylate orthodontic adhesiveAmerican Journal of Orthodontics and Dentofacial Orthopedics, 2003
- Shear bond strength of resin composite veneering material to gold alloy with varying metal surface preparationsThe Journal of Prosthetic Dentistry, 2001
- Effect of magnesia investments in the dental casting of pure titanium or titanium alloys.Dental Materials Journal, 1982