Overload Capability of Multiphase Machines Under Normal and Open-Phase Fault Conditions: A Thermal Analysis Approach
- 5 March 2020
- journal article
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 56 (3) , 2560-2569
Abstract
Multiphase drives are convenient for high power/high current applications as they allow the reduction of the phase current for given rated power and phase voltage. Due to their redundant structure, the multiphase drives have intrinsic open-phase fault-tolerant operation capability. This situation may happen when one or more power electronic units are turned off after a fault event and the drive configuration allows phase disconnection. In this case, the machine healthy phases can be overloaded in order to keep the torque constant and without any pulsations. The goal of the work is the evaluation of the thermal parameters of the stator windings of multiphase machines to be used in the analysis of both short thermal transients and steady state operation, during healthy and open-phase faults. The approach has a general validity and can be applied to any AC multiphase machine having distributed winding configuration. The prototype used for the experimental tests is an asymmetrical twelve-phase induction machine, having four three-phase stator sets with isolated neutral points. The stator windings thermal model is obtained experimentally, by considering the mutual heat exchange phenomena among the windings when one or more winding sets are disconnected. This thermal model allows at evaluating the proper machine overloading for short thermal transients and steady state operation in case of open-phase faults.Keywords
This publication has 19 references indexed in Scilit:
- Multiphase electrical machines and drives: A viable solution for energy generation and transportation electrification2016
- Stator Winding Thermal Conductivity Evaluation: An Industrial Production AssessmentIEEE Transactions on Industry Applications, 2016
- Stator-Winding Thermal Models for Short-Time Thermal Transients: Definition and ValidationIEEE Transactions on Industrial Electronics, 2015
- Control of Shaft-Line-Embedded Multiphase Starter/Generator for Aero-EngineIEEE Transactions on Industrial Electronics, 2015
- Fault-Tolerant Operation of Six-Phase Energy Conversion Systems With Parallel Machine-Side ConvertersIEEE Transactions on Power Electronics, 2015
- Advances in Converter Control and Innovative Exploitation of Additional Degrees of Freedom for Multiphase MachinesIEEE Transactions on Industrial Electronics, 2015
- Postfault Operation of an Asymmetrical Six-Phase Induction Machine With Single and Two Isolated Neutral PointsIEEE Transactions on Power Electronics, 2013
- Optimized design of a multiphase induction machine for an open rotor aero-engine shaft-line-embedded starter/generator2013
- Multiphase Electric Machines for Variable-Speed ApplicationsIEEE Transactions on Industrial Electronics, 2008
- Modeling and control of a multi-phase induction machine with structural unbalanceIEEE Transactions on Energy Conversion, 1996