Preparation and characterization of flexible, free‐standing, and easy‐fabricating BaTiO3‐P(VDF‐CTFE) dielectric nanocomposite
- 26 July 2019
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 40 (12) , 4742-4752
Abstract
The flexible and free‐standing nanocomposite films were fabricated by a simple solution‐casting process using BaTiO3 nanoparticles as fillers and P(VDF‐CTFE) 91/9 mol% as polymer matrix. To obtain good wettability between ceramic and polymer, the coupling agent 3‐Aminopropyltriethoxysilane was used to modify the surface of BaTiO3 fillers. A good compatibility of BaTiO3 and P(VDF‐CTFE) was achieved when a small amount of coupling agent was used for the surface modification of BaTiO3 fillers; therefore, the nanocomposites with a dense and uniform microstructure was obtained. It was experimentally found that both dielectric constant and breakdown strength were increased with a suitable amount of coupling agent due to the good compatibility. A dielectric constant of 51 at 1 kHz was obtained with 30 vol% fillers and 2 wt% coupling agent, which was about four times of that for the pure P(VDF‐CTFE) film. When an appropriate amount of coupling agent was coated on fillers, the energy storage density of the composite system was improved. A maximal discharge energy‐storage density of 3.8 J/cm3 was obtained for the nanocomposite film with 5 vol% of BaTiO3 and 2 wt% coupling agent, which is much higher than that of the composites without coupling agent.Keywords
Funding Information
- National Natural Science Foundation of China (U610256)
- Natural Science Foundation of Shanxi Province (201703D111003)
This publication has 29 references indexed in Scilit:
- Effect of coupling agents on the dielectric properties of CaCu3Ti4O12/PVDF compositesComposites Part B: Engineering, 2013
- Dielectric, mechanical and thermal properties of polymer/BaTiO3 composites for embedded capacitorComposites Part B: Engineering, 2013
- Fundamentals, processes and applications of high-permittivity polymer–matrix compositesProgress in Materials Science, 2012
- DEVELOPMENT OF POLYMER-BASED 0–3 COMPOSITES WITH HIGH DIELECTRIC CONSTANTJournal of Advanced Dielectrics, 2011
- Surface modification of BaTiO3 particles by silane coupling agents in different solvents and their effect on dielectric properties of BaTiO3/epoxy compositesColloids and Surfaces A: Physicochemical and Engineering Aspects, 2009
- Effect of the amount of 3-methacyloxypropyltrimethoxysilane coupling agent on physical properties of dental resin nanocompositesDental Materials, 2009
- Field-Activated Electroactive PolymersMRS Bulletin, 2008
- Ceramic–Polymer Composites with High Dielectric ConstantAdvanced Materials, 2007
- Thermal and optical properties of PMMA–titania hybrid materials prepared by sol‐gel approach with HEMA as coupling agentJournal of Applied Polymer Science, 2004
- Nanocrystalline Lead Titanate and Lead Titanate/Vinylidene Fluoride‐Trifluoroethylene 0‐3 NanocompositesJournal of the American Ceramic Society, 1998