Similar materials of colliery filling for physical simulation experiment
Authors:
- 30 May 2015
- journal article
- Published by Taylor & Francis in Materials Research Innovations
- Vol. 19 (sup5) , S5-304
Abstract
To study the interaction between the backfill and the overlying strata in paste filling mining, experiments were conducted on new similar materials of filling like raw materials of river sand, fly ash and cement, and the setting time and uniaxial compressive strength were main parameters. The optimal proportion of similar materials of filling was obtained by the uniform design method. Results show that there is a negative correlation between the uniaxial compressive strength of the similar materials of filling and the sand content and a positive correlation between the strength and cement content. The fly ash could not only reduce the setting time, but also could lead to a decrease in strength. The optimal proportion of river sand, fly ash and cement is 31 : 7 : 1, when the geometrically similar ratio is 1 : 100. Simulation test results using similar materials of filling prove that it could meet the experimental requirements.Keywords
This publication has 6 references indexed in Scilit:
- A physical simulation test for the rockburst in tunnelsJournal of Mountain Science, 2011
- Model study of deformation induced by fully mechanized caving below a thick loess layerInternational Journal of Rock Mechanics and Mining Sciences, 2010
- Model experimental research on deformation and subsidence characteristics of ground and wall rock due to mining under thick overlying terraneInternational Journal of Rock Mechanics and Mining Sciences, 2010
- Application of numerical analysis principles and key technology for high fidelity simulation to 3-D physical model tests for underground cavernsTunnelling and Underground Space Technology, 2005
- Dynamic modelling of induced seismicityInternational Journal of Rock Mechanics and Mining Sciences, 2004
- Laboratory studies on fracturing of low-permeability soilsCanadian Geotechnical Journal, 2001