The importance of flow and turbulence characteristics for hydrokinetic energy development on the Tanana River at Nenana, Alaska
Authors:
- 7 November 2011
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
- Vol. 226 (2) , 283-299
Abstract
The site selection for the installation of hydrokinetic devices along a river reach is an issue of fundamental importance. While it is acknowledged that multiple factors such as accessibility, navigation, safety, and hydraulics, among many others, must be considered in the final decision, this article focuses on the influence of river morphology on turbulence flow parameters. Specifically, continuous high-resolution velocity measurements from a hydrokinetic resource assessment on the Tanana River near Nenana in the interior of Alaska are analysed to estimate, kinetic energy (KE), turbulent kinetic energy (TKE) as well as KE partition at particular locations. To accomplish these tasks, two different methods used to rotate the coordinate systems into the main flow direction are correlated and compared in order to extract the turbulent parameters from the main flow. The coordinate system methods include the streamline coordinate rotation and the extraction of statistical fluctuations from the average flow. The streamline coordinate rotation method is chosen to extract the TKE in temporal series. The calculated TKE was up to 30 per cent of the total flow KE in measurements located in pools and dissipated downstream, beyond the highly turbulent locations of bathymetric depressions and river bends. The overall KE increased over a bed free of major macro-obstacles and reduced depth, where the TKE fraction accounted for only 2 per cent of the total KE. The visualizations of the KE and TKE are compared with the river morphology, leading to identification of helical flow, flow separation, and turbulent flow structures along the river bend and in pools to help the decision-making process in hydrokinetic planning.Keywords
This publication has 19 references indexed in Scilit:
- Turbulent and advective momentum fluxes in streamsWater Resources Research, 2010
- Modelling and field measurements in support of the hydrokinetic resource assessment for the Tanana river at Nenana, AlaskaProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2010
- Validation of Streamflow Measurements Made with Acoustic Doppler Current ProfilersJournal of Hydraulic Engineering, 2007
- Evaluation of Mean Velocity and Turbulence Measurements with ADCPsJournal of Hydraulic Engineering, 2007
- An investigation of pulsating turbulent open channel flow by large eddy simulationComputers & Fluids, 2006
- 1 min in the life of a river: selecting the optimal record length for the measurement of turbulence in fluvial boundary layersGeomorphology, 2005
- Practical aspects of ADCP data use for quantification of mean river flow characteristics; Part II: fixed-vessel measurementsFlow Measurement and Instrumentation, 2004
- Despiking Acoustic Doppler Velocimeter DataJournal of Hydraulic Engineering, 2002
- Turbulence structure in a river reach with sand bedWater Resources Research, 1998
- Acoustic Velocity Profiler for Laboratory and Field StudiesJournal of Hydraulic Engineering, 1997