Comparative Analysis of Woody Biomass Fly Ash and Class F Fly Ash as Supplementary Cementitious Materials in Mortar
Open Access
Abstract
Biomass fly ash is a sustainable, eco-friendly cement substitute with economic and performance benefits, being renewable compared to coal fly ash. This study examines using biomass fly ash (BFA) as a sustainable cement substitute, comparing it with Class F fly ash (CFA). With a water–binder ratio of 0.5 and replacement rates of 10%, 15%, 20%, 25%, and 30% (by mass), the research highlights BFA’s promising applications. BFA and CFA were mixed into cement paste/mortar to analyze their reactivity and properties, with hydration products CH and C-S-H evaluated at 7, 28, and 91 days. Compressive strength, micro-pore structure, and drying shrinkage (assessed from 7 to 182 days) were tested. Results showed BFA had similar pozzolanic reactions to CFA at later stages. While compressive strength decreased with higher BFA replacement rates, early-stage performance matched CFA; growth was CFA-10 (18 MPa) and BFA-10 (17.6 MPa). BFA mortars exhibited slightly better deformation properties. BFA-30 cement had superior performance, with a lower drying shrinkage rate of 65.7% from 14 to 56 days compared to CFA-10’s 73.4% and a more stable shrinkage growth rate decrease to 8.4% versus CFA-10’s 6.4% after 56 days. This study concluded that BFA, usable without preprocessing, performed best at a 10–15% replacement rate.Keywords
Funding Information
- JSPS KAKENHI (JP 22KK0065)
This publication has 71 references indexed in Scilit:
- Influence of freeze–thaw cycling on properties of cementitious systems doped with fly ash having optimized particle size distributionArchives of Civil and Mechanical Engineering, 2022
- Evaluating Biomass Ash Properties as Influenced by Feedstock and Thermal Conversion Technology towards Cement Clinker Production with a Lower Carbon FootprintWaste and Biomass Valorization, 2021
- Physical and permeability properties of cementitious mortars having fly ash with optimized particle size distributionCement and Concrete Composites, 2019
- Examining the pozzolanicity of supplementary cementitious materials using isothermal calorimetry and thermogravimetric analysisCement and Concrete Composites, 2017
- Evaluating co-benefits of energy efficiency and air pollution abatement in China’s cement industryApplied Energy, 2015
- Low Carbon Concrete Prepared with Scattering-Filling Coarse Aggregate ProcessInternational Journal of Concrete Structures and Materials, 2014
- Simple methods to estimate the influence of limestone fillers on reaction and property evolution in cementitious materialsCement and Concrete Composites, 2013
- Effect of W/B ratios on pozzolanic reaction of biomass ashes in Portland cement matrixCement and Concrete Composites, 2012
- Effect of fly ash fineness on compressive strength and pore size of blended cement pasteCement and Concrete Composites, 2005
- The influence of fly ash fineness on the strength of concreteCement and Concrete Research, 1991