Properties of organic and inorganic filler hybridization on Timoho Fiber‐reinforced polyester polymer composites
- 10 December 2021
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 43 (2) , 1147-1156
Abstract
Eco‐friendly composite made of Timoho Fiber (TF) continuously developed to get the best performance to replace plastic‐based synthetic fibers. This study focuses on investigating physical characteristics, mechanical properties, thermal analysis, and the morphology of TF‐reinforced polyester composites by adding organic (egg shell powder‐ESP) and inorganic (aluminum powder‐AP) fillers. Hot press method was used in the composite fabrication with considered volume fraction of TF, organic, and inorganic fillers. The results showed that the density of TF‐polyester composites decreases with the increasing volume fraction of the fibers. For additional fillers, it was shown that AP was more effective to be used to improve density than ESP. The tensile and impact strength of the composite increased with increasing TF volume. However, the addition of ESP and AP fillers into the composite caused different mechanical characteristics. Filler addition increased the elasticity modulus, toughness, thermal resistance increased, while the tensile strength decreased. ESP and AP fillers provided the best thermal resistance due to the relatively high thermal conductivity of ±1700°C compared to composites without fillers and amorphous ESP fillers. SEM observation supported the analysis of TF‐polyester composite mechanical characteristics.Keywords
This publication has 45 references indexed in Scilit:
- Tribological investigations of UHMWPE nanocomposites reinforced with three different organo‐modified claysPolymer Composites, 2016
- Coconut shell powder as cost effective filler in copolymer of acrylonitrile and butadiene rubberEcotoxicology and Environmental Safety, 2016
- Influence of CaCO3, Al2O3, and TiO2 microfillers on physico-mechanical properties of Luffa cylindrica/polyester compositesEngineering Science and Technology, an International Journal, 2016
- Evaluation of properties of bast fiber extracted from Calotropis (Millkweed) by a new decorticator machine and manual methodsIndustrial Crops and Products, 2016
- Improvement of epoxy resin properties by incorporation of TiO2 nanoparticles surface modified with gallic acid estersMaterials & Design (1980-2015), 2014
- Thermo-mechanical behaviors of thermoplastic starch derived from sugar palm tree (Arenga pinnata)Carbohydrate Polymers, 2013
- Thermoplastic starches: Properties, challenges, and prospectsStarch - Stärke, 2013
- Surface modification of coconut shell powder filled polylactic acid biocompositesJournal of Thermoplastic Composite Materials, 2012
- Agro-hybrid Composite: The Effects on Mechanical and Physical Properties of Oil Palm Fiber (EFB)/Glass Hybrid Reinforced Polyester CompositesJournal of Reinforced Plastics and Composites, 2007
- Thermal degradation and fire resistance of unsaturated polyester, modified acrylic resins and their composites with natural fibresPolymer Degradation and Stability, 2006