How Hydrogen Dielectric Strength Forces the Work Voltage in the Electric Discharge Machining
Open Access
- 15 May 2018
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 9 (5) , 240
Abstract
An electro-thermal model based on the Joule heating effect is proposed to simulate a single discharge in an electric discharge machining process. Normally, the dielectric strength of the hydrocarbons oil is approximately 20 MV/m, but it varies with both the thickness of the film and its decomposition. After the breakdown, the hydrocarbon oil has an average dielectric strength value of 2 MV/m. This value is close to the dielectric strength of the hydrogen, which is the main gas that results from the hydrocarbon oil decomposition, at temperatures between 6000 K and 9000 K. Therefore, the electric discharge occurs in a hydrogen atmosphere that imposes both the discharge gap and the work voltage. A 200 V voltage is associated to a 100 μm discharge gap, leading to a 20 V work voltage. Therefore, the 3 V work voltage control corresponds to approximately 15 μm. In other words, the increase of the discharge gap originates other discharge during the discharge pulse. The work voltage control, together with the multiple discharge method, is taken into account. The 100 μm discharge gap corresponds to the higher value of the transitory discharge gap that over evaluates the material removal and the tool wear rates. The results of the numerical simulations are validated with experimental data.Keywords
This publication has 13 references indexed in Scilit:
- A novel thermo-hydraulic coupling model to investigate the crater formation in electrical discharge machiningJournal of Physics D: Applied Physics, 2017
- Modelling of ECM and EDM processesCIRP Annals, 2013
- Critical assessment and numerical comparison of electro-thermal models in EDMJournal of Materials Processing Technology, 2008
- A finite element model of EDM based on the Joule effectInternational Journal of Machine Tools and Manufacture, 2006
- Time-resolved imaging and spatially-resolved spectroscopy of electrical discharge machining plasmaJournal of Physics D: Applied Physics, 2005
- After 60 years of EDM the discharge process remains still disputedJournal of Materials Processing Technology, 2004
- Theoretical models of the electrical discharge machining process. III. The variable mass, cylindrical plasma modelJournal of Applied Physics, 1993
- Theoretical models of the electrical discharge machining process. II. The anode erosion modelJournal of Applied Physics, 1989
- Theoretical models of the electrical discharge machining process. I. A simple cathode erosion modelJournal of Applied Physics, 1989
- Heat conduction model for the calculation of the volume of molten metal in electric dischargesJournal of Physics D: Applied Physics, 1974