An ultra low-power low-voltage class AB CMOS fully differential OpAmp
- 1 May 2012
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 02714302,p. 1967-1970
Abstract
This paper presents an ultra low-power class AB operational amplifier (OpAmp) designed in a low-cost 0.18 μm CMOS technology. Rail-to-rail input operation is achieved by using complementary input pairs with adaptive bias to enhance slew-rate. A class AB output stage is employed. For low-voltage low-power operation, the transistors both in the input and the output stage are biased in the sub-threshold region. The simulated DC open loop gain is 51 dB, the unity gain frequency is 40 kHz with a 65° phase margin and the slew-rate is 0.12 V/μs with 10 pF capacitive loads. A common-mode feed-forward circuit (CMFF) increases CMRR, keeping the DC gain almost constant: its relative error remains below 1 % for a (-40°C, +120°C) temperature range. The proposed OpAmp consumes only 1 μW at 0.8 V supply.Keywords
This publication has 6 references indexed in Scilit:
- Design of a 0.8 Volt Fully Differential CMOS OTA Using the Bulk-Driven Technique2005
- Low-Voltage Super class AB CMOS OTA cells with very high slew rate and power efficiencyIEEE Journal of Solid-State Circuits, 2005
- A 0.5-V bulk-input fully differential operational transconductance amplifier2004
- Feedback vs. feedforward common-mode control: a comparative study2002
- Compact low-voltage power-efficient operational amplifier cells for VLSIIEEE Journal of Solid-State Circuits, 1998
- Design of Low-Voltage, Low-Power Operational Amplifier Cells1996