Pervious concrete with waste foundry sand: mechanical and hydraulic properties
Open Access
- 1 January 2022
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 27 (1)
Abstract
One of the main challenges of the metallurgical industry is the management of the principal waste generated in the production of castings, which is the waste foundry sand (WFS). Potential solutions include the use of WFS in civil construction due to its mineral origin and the high volume available to meet possible demand. This study analyzed the influence of WFS on the mechanical and hydraulic properties of pervious concrete paving blocks. The experimental stage involved mixtures with 0% (reference) and 100% replacement of quartz sand (QS) by WFS, in concrete with consumption of 350 kg/m3 and 450 kg/m3 of Portland cement. Cylindrical specimens, pavers, and pervious concrete slabs were submitted to water absorption, compressive strength, and determination of the permeability coefficient (k) tests. Analysis for physicochemical characterization of leachate samples of the studied concretes was also carried out. After the statistical analysis of the results, it was possible to conclude that the WFS did not change the mechanical (Rc; Rt) and hydraulic (k; absorption) properties of pervious concrete mixes (WFS1; WFS2) when compared to the reference mixes (QS1; QS2). The changes in the results of the physicochemical parameters are related to the higher consumption of Portland cement from mix 2, increasing hardness, total solids, and alkalinity.Keywords
This publication has 21 references indexed in Scilit:
- Comprehensive investigation of permeability characteristics of pervious concrete: A hydrodynamic approachConstruction and Building Materials, 2016
- Functional and environmental performance of waste foundry sand applied in landfillsInternational Journal of Environmental Studies, 2015
- Mechanical and toxicological evaluation of concrete artifacts containing waste foundry sandWaste Management, 2014
- Efeito da adição de areia de fundição residual e cal a solos argilosos no módulo de resiliênciaTransportes, 2014
- Effect of Coarse Aggregate Sizes on Properties of Porous Concrete Paving BlocksAdvanced Materials Research, 2014
- Experimental study on Portland cement pervious concrete mechanical and hydrological propertiesConstruction and Building Materials, 2014
- High-Strength High-Porosity Pervious Concrete PavementAdvanced Materials Research, 2013
- The effect of waste foundry sand (WFS) as partial replacement of sand on the mechanical, leaching and micro-structural characteristics of ready-mixed concreteConstruction and Building Materials, 2012
- Pore structure features of pervious concretes proportioned for desired porosities and their performance predictionCement and Concrete Composites, 2011
- Utilization of waste foundry sand (WFS) in concrete manufacturingResources, Conservation and Recycling, 2011