Influence of air exposures and thermal treatments on the secondary electron yield of copper
- 1 May 2000
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 18 (3) , 972-979
Abstract
The variation of the secondary electron yield (SEY) of sputter-cleaned oxygen-free high-conductivity copper has been studied as a function of air exposure duration at room temperature. After short air exposures of some seconds the maximum SEY (δmax) of clean copper is reduced from 1.3 to less than 1.2, due to the oxidation of the copper surface. Prolonged air exposure increases the SEY steadily until, after about 8 days of atmospheric exposure, δmax is higher than 2. Air exposures at higher temperatures have been found to be effective in reducing the SEY of technical copper surfaces. A 5 min air exposure of copper at 350 °C followed by a 350 °C bakeout under vacuum reduces δmax to about 1.05, which is lower than the value of pure copper and that of Cu2O.Keywords
This publication has 6 references indexed in Scilit:
- Surface cleaning efficiency measurements for UHV applicationsVacuum, 1999
- Evolution of Secondary Electron Emission Characteristics of Spacecraft SurfacesJournal of Spacecraft and Rockets, 1997
- Time variation of secondary electron emission during electron bombardment of rutileApplied Surface Science, 1997
- An X-ray photo-electron spectroscopic investigation of the air-formed film on copperCorrosion Science, 1992
- Photoemission study of the oxidation of copper filmsSurface Science, 1974
- Characterization of oxygen species adsorbed on copper and nickel oxides by X-ray photoelectron spectroscopySurface Science, 1972