Inclination-Induced Interfacial Asymmetry and Tangential Force Balance of Bubbles Pinned at Wetting-Step Boundaries
- 19 August 2026
- journal article
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (34) , 25217-25227
Abstract
Bubble growth on inclined surfaces is governed by the coupling among buoyancy, interfacial deformation, and three-phase contact-line constraint. Here, we experimentally investigate quasi-static bubble growth and detachment on superhydrophobic substrates patterned with a circular wetting-step line, which pins the three-phase contact line throughout the prenecking stage. Increasing substrate inclination shortens the detachment period while maintaining cycle-to-cycle coefficients of variation below 2%. Because lateral contact-line motion is suppressed, the substrate-parallel component of buoyancy produces both inclination-dependent global shape deformation and progressively stronger lateral asymmetry, characterized by a higher aspect ratio at a given normalized growth stage and a larger lateral offset of the projected bubble centroid, respectively. The apparent contact-angle distribution also becomes asymmetric: the upslope advancing-side angle decreases during growth, whereas the downslope receding-side angle remains comparatively high, causing the apparent contact-angle difference to increase throughout the prenecking stage. A quasi-static tangential force balance, formulated using the resultant capillary traction along the pinned circular boundary, quantitatively relates the dimensionless tangential load to the measured contact-angle asymmetry. A zero-intercept regression yields an effective retention coefficient of 0.8683 with R2 = 0.9989, while the coefficients evaluated separately at each nonzero inclination differ from the global regression value by less than 4% and exhibit no monotonic dependence on inclination. These results establish a reduced interfacial-mechanics description of the critical prenecking state under geometric contact-line constraint and clarify how inclination-induced tangential buoyancy is accommodated through coupled interfacial and apparent-contact-angle asymmetry, providing a mechanistic basis for regulating bubble growth and release on wettability-patterned surfaces.Keywords
Funding Information
- National Natural Science Foundation of China (12225202)
- China Postdoctoral Science Foundation (2025M784270)
- Graduate Program in Physics at UNIFAL-MG (2025BKZ039)
This publication has 33 references indexed in Scilit:
- Angle‐Dependent Bubbly Flow and the Effects on Gas Evolution in Water ElectrolysisAdvanced Energy Materials, 2026
- The behavior of underwater bubble formation on the inclined orifice plateChemical Engineering Journal, 2026
- Enzyme induced polymer degradation as a pathway to create microbial habitats for biomanufacturing intensificationChemical Engineering Journal, 2024
- Droplet and bubble wetting behaviors: The roles of surface wettability and roughnessColloids and Surfaces A: Physicochemical and Engineering Aspects, 2022
- Utilisation of oxygen from water electrolysis – Assessment for wastewater treatment and aquacultureChemical Engineering Science, 2021
- Stable drag reduction of anisotropic superhydrophobic/hydrophilic surfaces containing bioinspired micro/nanostructured arrays by laser ablationColloids and Surfaces A: Physicochemical and Engineering Aspects, 2021
- Bubble formation from an orifice in liquid cross-flowChemical Engineering Journal, 2020
- Liquid Drops on an Inclined Plane: The Relation between Contact Angles, Drop Shape, and Retentive ForceJournal of Colloid and Interface Science, 1995
- Bubble formation under constant-flow conditionsChemical Engineering Science, 1993
- Studies at phase interfaces. I. The sliding of liquid drops on solid surfaces and a theory for spray retentionJournal of Colloid Science, 1962