Preparation of Porous Alumina Monoliths Using Indirect 3D Printing
Authors:
- Vsevolod A. VdovichenkoVVVsevolod A. Vdovichenko
- Anton I. LysikovALAnton I. Lysikov
- Ekaterina E. VorobyevaEVEkaterina E. Vorobyeva
- Aleksandr V. PolukhinAPAleksandr V. Polukhin
- Andrey N. BarsukovABAndrey N. Barsukov
- Darya A. SeleznevaDSDarya A. Selezneva
- Aleksandr V. ShnayderASAleksandr V. Shnayder
- Ekaterina V. ParkhomchukEPEkaterina V. Parkhomchuk
- 17 August 2026
- journal article
- Published by Wiley in Advanced Engineering Materials
- Vol. 28 (19)
Abstract
The synthesis of alumina monoliths is carried out by intrusion of an alumina precursor paste into the channels of a 3D‐printed template, followed by drying and calcination of the composite. To obtain durable monoliths, several approaches are applied: (a) conducting an additional phase transition to increase crystallite mobility; (b) slowing the composite drying rate by increasing the amount of slow‐boiling plasticizers in the paste and introducing isothermal exposure at low temperatures; and (c) introducing alumina additives with different porosity to reduce composite shrinkage. The first approach yields a strong alumina monolith with a monomodal pore size distribution. The other approaches produce coherent monoliths with multimodal pore size distribution, suitable for comparative catalytic tests in the hydroconversion of vacuum oil residue ( T = 400 °C, p(H 2 ) = 10 MPa, LHSV = 0.62 h −1 , H 2 /Feed = 1000 L/L). The monolithic catalyst demonstrates greater activity as a guard catalyst than the reference pellets, as evidenced by a 9% reduction in product density and a 79‐fold reduction in kinematic viscosity (vs. 4% and 3‐fold for pellets, respectively). This difference is attributed to more efficient external mass transfer in the structured macrocapillary geometry.Keywords
This publication has 30 references indexed in Scilit:
- DLP 3D printing of alumina catalyst architectures: Design, kinetics and modeling of structure effects on catalyst performanceChemical Engineering Journal, 2024
- Hard-templated macroporous alumina with thick mesoporous walls: The key factors of pore formationCeramics International, 2023
- SAPO-containing alumina CoMoNi-catalysts for hydrotreatment of heavy oil: Pore hierarchy as a key parameter for catalyst stabilizationFuel, 2022
- Hydrocracking, hydrogenation and hydro-deoxygenation of fatty acids, esters and glycerides: Mechanisms, kinetics and transport phenomenaChemical Engineering Journal, 2022
- Scaling of lignin monomer hydrogenation, hydrodeoxygenation and hydrocracking reaction micro-kinetics over solid metal/acid catalysts to aromatic oligomersChemical Engineering Journal, 2020
- Monoliths with MFI zeolite layers prepared with the assistance of 3D printing: Characterization and performance in the gas phase isomerization of α-pineneApplied Catalysis A: General, 2019
- Catalytic cracking of n-hexane for producing light olefins on 3D-printed monoliths of MFI and FAU zeolitesChemical Engineering Journal, 2018
- In situ Generation of Ni Nanoparticles from Metal–Organic Framework Precursors and Their Use for Biomass HydrodeoxygenationChemSusChem, 2015
- Relationship between Formation Conditions, Properties, and Crystallite Size of BoehmiteJournal of Colloid and Interface Science, 2002
- Boehmite formation mechanism in precipitate ageingReaction Kinetics and Catalysis Letters, 1982