Anisotropy in the Tensile Properties of a Selective Laser Melted Ti-5Al-5Mo-5V-1Cr-1Fe Alloy during Aging Treatment
Open Access
Abstract
In this work, the anisotropic microstructure and mechanical properties of selective laser melted (SLMed) Ti-5Al-5Mo-5V-1Cr-1Fe (Ti-55511) alloy before and after aging treatment are investigated. Owing to the unique thermal gradient, the prior columnar β grains with {001} texture component grow in the building direction, and the mechanical properties of the as-fabricated Ti-55511 alloy exhibit slight anisotropy. Aging treatment creates uniform precipitation of the α phase at the boundaries as well as the interior of β grains. Due to the microstructure of the aged samples with a weak texture, the mechanical properties exhibit almost isotropic characteristics with an ultimate tensile strength of 1133 to 1166 MPa, yield strength of 1093 to 1123 MPa, and elongation from 13 to 16%, which meet the aerospace allowable specification very well. By XRD and EBSD analyses, the total dislocation density of the aged samples (~134.8 × 1013 m−2) is significantly lower than that of the as-fabricated samples (~259.4 × 1013 m−2); however, the aged samples exhibit a higher geometrically necessary dislocation (GND) density (~28.5 × 1013 m−2) compared with the as-fabricated samples GND density (~2.9 × 1013 m−2). Thus, a new approach to strengthening theory for estimating the anisotropic mechanical properties of AM alloys is proposed.Keywords
Funding Information
- Natural Science Foundation of Hunan Province, China (2022JJ20061)
- High-Tech Industrial Science and Technology Innovation Leading Plan of Hunan Province, China (2020GK4018)
- Transformation and Industrialization Plan of Scientific and Technological Achievements of Hunan Province, China (2020GK2031)
- State Key Laboratory of Powder Metallurgy, Central South University
This publication has 66 references indexed in Scilit:
- Microstructural Characterization of a Prototype Titanium Alloy Structure Processed via Direct Laser Deposition (DLD)Metallurgical and Materials Transactions B, 2011
- As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser MeltingMetallurgical and Materials Transactions A, 2011
- The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti-6Al-4VMetallurgical and Materials Transactions A, 2010
- Laser processing of SiC-particle-reinforced coating on titaniumScripta Materialia, 2010
- ω-Assisted nucleation and growth of α precipitates in the Ti–5Al–5Mo–5V–3Cr–0.5Fe β titanium alloyActa Materialia, 2009
- Toward a physical model for strain hardening in fcc crystalsMaterials Science and Engineering: A, 2008
- Structure–property optimization of ultrafine-grained dual-phase steels using a microstructure-based strain hardening modelActa Materialia, 2007
- Microstructural changes produced by plastic deformation in the UNS S31803 duplex stainless steelJournal of Materials Processing Technology, 2006
- Properties of TIMETAL 555 (Ti-5Al-5Mo-5V-3Cr-0.6Fe)Journal of Materials Engineering and Performance, 2005
- Design strength of VT22 titanium alloy in different structural conditionsMaterials Science, 1991