A Switched Tunable Inductor Based on Magnetic Flux Linkage Modification
- 13 November 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 42 (1) , 6-9
Abstract
An on-chip switched tunable inductor based on magnetic flux linkage modification is proposed. The magnetic flux linkage was adjusted through an auxiliary coil that was connected to a flip-flop in parallel with a MOS switch. The inductance was monotonically tuned by applying MOS gate voltages, which had a broad tuning range of 1.32-2.03 nH (42.4%) at 8 GHz. A high quality factor of 61.6 at 8 GHz was achieved because the flip-flop provided negative resistance.Keywords
Funding Information
- Ministry of Science and Technology of Taiwan
This publication has 15 references indexed in Scilit:
- A 6.39GHz–14GHz series resonator mode-switching oscillator with 186–188dB FoM and 197dB FoMA in 65nm CMOS2015
- The Cross-Coupled Pair - Part I [A Circuit for All Seasons]IEEE Solid-State Circuits Magazine, 2014
- A novel variable inductor-based differential Colpitts VCO design with 17% frequency tuning range for 30 and 60 GHz applications2014
- A study on RF/microwave tunable inductor topologies2013
- Wide Tunning Range 60 GHz VCO and 40 GHz DCO Using Single Variable InductorIEEE Transactions on Circuits and Systems I: Regular Papers, 2012
- A Bias-Varied Low-Power K-band VCO in 90 nm CMOS TechnologyIEEE Microwave and Wireless Components Letters, 2012
- A 2.4/5 GHz Dual-Band VCO using a Variable Inductor and Switched Resonator2007
- Possibility Of MMIC On Si: The Lossy Substrate Issue2005
- Strain-induced very low noise RF MOSFETs on flexible plastic substrate2005
- RF passive devices on Si with excellent performance close to ideal devices designed by electro-magnetic simulation2004