Extending the LQR to the design of PID type‐ii and type‐iii control loops
Open Access
- 18 November 2022
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Control Theory & Applications
- Vol. 17 (6) , 713-743
Abstract
This paper concerns the improvement on Proportional‐Integration‐Derivative (PID) control for standard second‐order plus time‐delay systems (SOPTD). To achieve higher tracking precision and stronger disturbance rejection, a PID type‐ii and type‐iii control‐loops design method based on the combination of the linear quadratic regulator (LQR) and dominant pole configuration technology is proposed in this paper. The PID type‐ii control loop is capable of achieving perfect tracking of step and ramp reference signals with zero steady‐state position and velocity error. The PID type‐iii control loop is capable of achieving perfect tracking of step, ramp and parabolic reference signals with zero steady‐state position, velocity and acceleration error. The effectiveness of the proposed PID type‐ii and type‐iii controller parameters tuning rules has been demonstrated via simulation of over‐damped, critical‐damped and under‐damped systems. To be specific, compared with the PID type‐i control loop, rise time, settling time and disturbance rejection property of the system have been significantly improved while realizing faster reference signal tracking. Finally, the effects of non‐dominant pole on the stability and robustness of PID type‐ii and PID type‐iii closed loop systems have also been discussed.Keywords
This publication has 36 references indexed in Scilit:
- Multi‐input and multi‐output proportional‐integral‐derivative controller design via linear quadratic regulator‐linear matrix inequality approachIET Control Theory & Applications, 2015
- Multi-objective LQR with optimum weight selection to design FOPID controllers for delayed fractional order processesISA Transactions, 2015
- A conformal mapping based fractional order approach for sub-optimal tuning of PID controllers with guaranteed dominant pole placementCommunications in Nonlinear Science and Numerical Simulation, 2012
- Extending the Symmetrical Optimum criterion to the design of PID type-p control loopsJournal of Process Control, 2012
- Multivariable-PI-Based $dq$ Current Control of Voltage Source Converters With Superior Axis Decoupling CapabilityIEEE Transactions on Industrial Electronics, 2010
- PID controller design based on optimal servo and v-gap metric2010
- Control design for time-delay systems based on quasi-direct pole placementJournal of Process Control, 2010
- Performance Limitation and Autotuning of Inverse Optimal PID Controller for Lagrangian SystemsJournal of Dynamic Systems, Measurement, and Control, 2004
- PI/PID controller tuning via LQR approachChemical Engineering Science, 2000
- A modified Smith predictor for controlling a process with an integrator and long dead-timeIEEE Transactions on Automatic Control, 1996