Influence of graphene nanoplates andABS‐g‐MAHon the thermal, mechanical, and electromagnetic properties ofPC/ABSblend
- 6 August 2021
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (3) , 51500
Abstract
Polymeric blends based on polycarbonate (PC) and acrylonitrile–styrene‐butadiene copolymer (ABS) are applied mainly in the electronic and automotive industries. Studies to improve the properties of PC/ABS blend have led to graphene nanoplates (GNP) addition, a carbon nanofiller derived from graphite that presents some of the promising properties of graphene. In this work, the effect of the addition of GNP (3 and 5 wt%) and maleic anhydride grafted ABS (ABS‐g‐MAH) were evaluated on the thermal, mechanical, rheological, and electromagnetic properties of PC/ABS blends (85/15), a different blend ratio of previous studies. It was verified that the GNP addition significantly increased the thermal stability of the blends. Furthermore, the mechanical tests showed that ABS‐g‐MAH acted as an efficient compatibilizer for the PC/ABS blends, and the GNP addition improved the Shore D hardness, the elastic modulus, and the maximum tensile strength of all compositions. Besides, it was observed an overlapping effect of the GNP and ABS‐g‐MAH addition on the mechanical properties of the blend. The addition of 3 wt% GNP to the PC/ABS (85/15) blend also doubled the elongation at break of the material. Furthermore, these contents resulted in a slight increase of the electromagnetic waves attenuation of 1–2 dB associated to electromagnetic waves reflection.Keywords
Funding Information
- Conselho Nacional de Desenvolvimento Científico e Tecnológico (440130/2020‐4, 305123/2018‐1, 405675/2018‐6, 310196/2018‐3)
- Fundação de Amparo à Pesquisa do Estado de São Paulo (2019/11130‐9)
This publication has 51 references indexed in Scilit:
- Poly(propylene)/Graphene Nanoplatelet Nanocomposites: Melt Rheological Behavior and Thermal, Electrical, and Electronic PropertiesMacromolecular Chemistry and Physics, 2011
- Effect of ABS Rubber Content on the Localization of MWCNTs in PC/ABS Blends and Electrical Resistivity of the CompositesMacromolecular Materials and Engineering, 2010
- Solvothermal preparation of maleic anhydride grafted onto acrylonitrile–butadiene–styrene terpolymer (ABS)Polymer, 2005
- A TGA/FTIR and mass spectral study on the thermal degradation of bisphenol A polycarbonatePolymer Degradation and Stability, 2004
- Effects of ABS‐g‐MAH on mechanical properties and compatibility of ABS/PC alloyJournal of Applied Polymer Science, 2001
- Grafting of Maleic Anhydride onto Acrylonitrile-Butadiene-Styrene Terpolymer: Synthesis and CharacterizationPolymer-Plastics Technology and Engineering, 1999
- The thermal degradation of acrylonitrile-butadiene-styrene terpolymei as studied by TGA/FTIRPolymer Degradation and Stability, 1995
- Polycarbonate/ABS blends: Processability, thermal properties, and mechanical and impact behaviorAdvances in Polymer Technology, 1994
- Polycarbonate-SAN copolymer interactionPolymer, 1993
- Fractography of injection molded polycarbonate acrylonitrile‐butadiene‐styrene terpolymer blendsPolymer Engineering & Science, 1992