Characteristics of Plastic Waste Processing in the Modern Recycling Plant Operating in Poland
Open Access
Abstract
Although Poland is one of the leading recipients of the waste stream in the European Union (EU), it is at the same time below the average in terms of efficiency of their use/utilization. The adopted technological solutions cause waste processing rates to be relatively low in Poland. As a result, the report of the Early Warning and Response System (EWRS) of the EU indicated Poland as one of the 14 countries of the EU which are at risk in terms of possibility of achieving 50% recycling of waste. This article discusses the implemented technological solutions, and shows the profitability of the investment and the values of the process heat demand both for extractor and reactor. The experimental part analyzed the composition of the input and output of the process and compared it to the required fuel specifications. Attention was drawn to the need to improve the recycling process in order to increase the quality of manufactured fuel components. As potential ways of solving the problem of low fuel quality, cleaning the sorted reaction mass from solid particles and extending the technological line with a distillation column have been proposed. The recommended direction of improvement of the technology is also the optimization of the process of the reactor’s purification and removal of contaminants.Keywords
Funding Information
- Program Operacyjny (Innowacyjna Gospodarka Działanie 4.4.)
This publication has 38 references indexed in Scilit:
- Thermolysis of waste plastics to liquid fuelA suitable method for plastic waste management and manufacture of value added products—A world prospectiveRenewable and Sustainable Energy Reviews, 2010
- Analysis of products from the pyrolysis and liquefaction of single plastics and waste plastic mixturesResources, Conservation and Recycling, 2007
- Product distribution modelling in the thermal pyrolysis of high density polyethyleneJournal of Hazardous Materials, 2007
- Tertiary Resource Recovery from Waste Polymers via Pyrolysis: Neat and Binary Mixture Reactions of Polypropylene and PolystyreneIndustrial & Engineering Chemistry Research, 2001
- Pyrolysis characteristics and kinetics of municipal solid wastesFuel, 2001
- Recycling of Polyethene and Polypropene in a Novel Bench-Scale Rotating Cone Reactor by High-Temperature PyrolysisIndustrial & Engineering Chemistry Research, 1998
- Examination and Evaluation of the Use of Screen Heaters for the Measurement of the High Temperature Pyrolysis Kinetics of Polyethene and PolypropeneIndustrial & Engineering Chemistry Research, 1997
- On the thermal treatment of plastic mixtures of MSW: Pyrolysis kineticsWaste Management, 1993
- Thermal degradation study of isotactic polypropylene using factor‐jump thermogravimetryJournal of Polymer Science: Polymer Chemistry Edition, 1982
- Thermogravimetric studies of polymethylenes and polyethylenesJournal of Polymer Science: Polymer Symposia, 1976