A surrogate model approach for associating wind farm load variations with turbine failures
Authors:
- Laura SchröderLSLaura Schröder
- Nikolay Krasimirov DimitrovNDNikolay Krasimirov Dimitrov
- David Robert VerelstDVDavid Robert Verelst
Open Access
- 17 August 2020
- journal article
- research article
- Published by Copernicus GmbH in Wind Energy Science
- Vol. 5 (3) , 1007-1022
Abstract
In order to ensure structural reliability, wind turbine design is typically based on the assumption of gradual degradation of material properties (fatigue loading). Nevertheless, the relation between the wake-induced load exposure of turbines and the reliability of their major components has not been sufficiently well defined and demonstrated. This study suggests a methodology that makes it possible to correlate loads with reliability of turbines in wind farms in a computationally efficient way by combining physical modeling with machine learning. It can be used for estimating the current health state of a turbine and enables a more precise prediction of the “load budget”, i.e., the effect of load-induced degradation and faults on the operating costs of wind farms. The suggested approach is demonstrated on an offshore wind farm for comparing performance, loads and lifetime estimations against recorded main bearing failures from maintenance reports. The validation of the estimated power against the 10 min supervisory control and data acquisition (SCADA) power signals shows that the surrogate model is able to capture the power performance relatively well with a 1.5 % average error in the prediction of the annual energy production (AEP). It is found that turbines positioned at the border of the wind farm with a higher expected AEP are estimated to experience earlier main bearing failures. However, a clear connection between the load estimations and failure observations could not be confirmed in this study. Finally, the analysis stresses that more failure data are required in future work to enable statistically significant associations of the observed main bearing lifetimes with load exposures across the wind farm and to validate and generalize the suggested approach and its associated findings.Keywords
All Related Versions
This publication has 24 references indexed in Scilit:
- Surrogate models for parameterized representation of wake‐induced loads in wind farmsWind Energy, 2019
- From SCADA to lifetime assessment and performance optimization: how to use models and machine learning to extract useful insights from limited dataJournal of Physics: Conference Series, 2019
- From wind to loads: wind turbine site-specific load estimation with surrogate models trained on high-fidelity load databasesWind Energy Science, 2018
- Impact of turbulence induced loads and wave kinematic models on fatigue reliability estimates of offshore wind turbine monopilesOcean Engineering, 2018
- Analysis of SCADA data for early fault detection, with application to the maintenance management of wind turbinesRenewable Energy, 2018
- SCADA alarms processing for wind turbine component failure detectionJournal of Physics: Conference Series, 2016
- Mapping Wind Farm Loads and Power Production - A Case Study on Horns Rev 1Journal of Physics: Conference Series, 2016
- Simulation and Estimation of Reliability in a Wind Farm Considering the Wake EffectIEEE Transactions on Sustainable Energy, 2012
- Reliability of Wind Turbines2007
- Reliability worth assessment of distribution system with large wind farm considering wake effect2006