Numerical Study on the Aerodynamic Heating Characteristics of the Cantilevered Injection System for Oblique Detonation Engine Inlets
Open Access
Abstract
This paper investigates the flowfield patterns and distributions of surface heat flux of the cantilevered injection system for oblique detonation engine inlets. Three-dimensional complex shock wave/boundary layer interaction and shock wave/shock wave interaction between injectors are studied by solving Navier–Stokes equations under laminar flow conditions. The results indicate that there are three possible positions of localized peak heat flux, i.e., the leading edge of the injector near the bottom, the inlet wall surface below the injector, and the downstream of the injector sidewall. All the regions of high heat flux are related to flow reattachment or stagnation. Three types of flow patterns are observed along the inlet surface, i.e., partial separation, completely regular separation, and completely nonregular separation, resulting in increasingly complex distributions of heat flux. The localized peak heat flux which appears at the leading edge and the sidewalls of the injectors can reach values dozens of times higher than the undisturbed region within the interaction region.Keywords
Funding Information
- National Key Research and Development Plan of China (2019YFA0405204, 12172365, 12072353, 12132017)
- National Natural Science Foundation of China (2019YFA0405204, 12172365, 12072353, 12132017)
This publication has 36 references indexed in Scilit:
- Numerical Simulation of Gaseous Hydrocarbon Fuel Injection in a Hypersonic InletJournal of Propulsion and Power, 2010
- Numerical Simulation of a Real Shcramjet FlowfieldJournal of Propulsion and Power, 2006
- Numerical Investigation of the Turbulent Mixing Performance of a Cantilevered Ramp InjectorAIAA Journal, 2002
- Insights in Turbulence Modeling for Crossing-Shock-Wave/Boundary-Layer InteractionsAIAA Journal, 2001
- Review of Propulsion Applications of Detonation WavesAIAA Journal, 2000
- Flowfield surveys and computations of a crossing-shock wave/boundary-layer interactionAIAA Journal, 1996
- Structure of a turbulent double-fin interaction at Mach 4AIAA Journal, 1995
- Laser interferometer skin-friction measurements of crossing-shock-wave/turbulent-boundary-layer interactionsAIAA Journal, 1994
- Simulation of blunt-fin-induced shock-wave and turbulent boundary-layer interactionJournal of Fluid Mechanics, 1985
- Blunt fin-induced shock wave/turbulent boundary-layer interactionAIAA Journal, 1982