Biomechanical Assessment of Vertebroplasty Combined with Cement-Augmented Screw Fixation for Lumbar Burst Fractures: A Finite Element Analysis
Open Access
- 21 March 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (6) , 2133
Abstract
A hybrid fixation method, using a combination of vertebroplasty and cement-augmented screws, has been demonstrated as a useful technique for securing osteoporotic burst fractures. The purpose of this study was to assess changes in the range of motion (ROM) and stress in the spine after treating a lumbar burst fracture with this hybrid method. Five finite element models were developed: (a) intact lumbar spine (INT), (b) INT with vertebroplasty at L3 (AwC), (c) two-segment fixation of AwC (AwC-TSF), (d) AwC-TSF model with cement-augmented screws (AwC-TSF-S), and (e) INT with an L3 burst fracture treated with two-segment fixation (TSF). After loading, the models were evaluated in terms of the ROM of each motion segment, stiffness of fusion segments, and stresses on the endplates and screws. The results showed that the TSF model has a larger ROM at the instrumented segments than both the AwC-TSF and AwC-TSF-S models. The stiffness at L2–L4 under extension and lateral bending in AwC-TSF, AwC-TSF-S and TSF was approximately nine times greater than the INT model. In conclusion, the hybrid fixation method (AwC-TSF-S) results in a stiffer construct and lower ROM at instrumented segments, which may also reduce the risk of fracture of adjacent vertebrae.Keywords
This publication has 33 references indexed in Scilit:
- Effects of cord pretension and stiffness of the Dynesys system spacer on the biomechanics of spinal decompression- a finite element studyBMC Musculoskeletal Disorders, 2013
- Short Segment Fixation for Thoracolumbar Burst Fracture Accompanying Osteopenia : A Comparative StudyJournal of Korean Neurosurgical Society, 2013
- Effect of Spacer Diameter of the Dynesys Dynamic Stabilization System on the Biomechanics of the Lumbar SpineJournal of Spinal Disorders & Techniques, 2012
- Bone Cement-Augmented Short Segment Fixation with Percutaneous Screws for Thoracolumbar Burst Fractures Accompanied by Severe OsteoporosisJournal of Korean Neurosurgical Society, 2012
- The Use of Screw at the Fracture Level in the Treatment of Thoracolumbar Burst FracturesJournal of Spinal Disorders & Techniques, 2009
- Two levels above and one level below pedicle screw fixation for the treatment of unstable thoracolumbar fracture with partial or intact neurologyJournal of Orthopaedic Surgery and Research, 2009
- Bone Cement Augmentation of Short Segment Fixation for Unstable Burst Fracture in Severe OsteoporosisJournal of Korean Neurosurgical Society, 2008
- Hybrid multidirectional test method to evaluate spinal adjacent-level effectsClinical Biomechanics, 2007
- Treatment of unstable thoracolumbar junction burst fractures with short- or long-segment posterior fixation in magerl type a fracturesEuropean Spine Journal, 2007
- Complications in surgical treatment of thoracolumbar injuriesEuropean Spine Journal, 2002