Ultrahigh electromagnetic interference shielding performance of lightweight, flexible, and highly conductive copper-clad carbon fiber nonwoven fabrics
- 10 July 2017
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 5 (31) , 7853-7861
Abstract
Highly conductive carbon-based fibrous materials have become one of the most sought-after components in electromagnetic interference (EMI) shielding due to their well-known properties. Herein, to fabricate exceptional shielding materials which possess desirable specific EMI shielding effectiveness (SSE) and absolute shielding effectiveness (SSEt), lightweight, flexible, pitch-based activated carbon fiber fabrics (ACFs) that bear high surface areas and fitting thicknesses were fabricated as a carbon framework. Moreover, a thin copper layer uniformly clad on the fiber surface, as a highly conductive functional part, was deposited via electroless plating. The EMI shielding performance was studied in both low and high frequency ranges of 30 MHz–1.5 GHz and 1.5–10 GHz, respectively. The fiber-stacked foam architecture provided the assembled fabrics with a high conductivity and multiple internal reflections during shielding that manifested exceptional SSE (up to 482.2 dB cm3 g−1) and SSEt (11 162 dB cm2 g−1) values, which were far better than those of the pure ACFs and void-free Cu foil. Moreover, the fabrics also showed excellent pitting resistance. The prepared shielding materials can be applied to many practical and commercial applications.Keywords
Funding Information
- Ministry of Science ICT and Future Planning (2016K000206)
- National Research Foundation of Korea (2014R1A4A1008140)
This publication has 44 references indexed in Scilit:
- Fabrication and electromagnetic interference shielding performance of open-cell foam of a Cu–Ni alloy integrated with CNTsApplied Surface Science, 2014
- Chemoselectivity-induced multiple interfaces in MWCNT/Fe3O4@ZnO heterotrimers for whole X-band microwave absorptionNanoscale, 2014
- Lightweight Polypropylene/Stainless-Steel Fiber Composite Foams with Low Percolation for Efficient Electromagnetic Interference ShieldingACS Applied Materials & Interfaces, 2014
- Electromagnetic shielding and corrosion resistance of electroless Ni‐P and Ni‐P‐Cu coatings on polymer/carbon fiber compositesPolymer Composites, 2014
- Terahertz shielding of carbon nanomaterials and their composites – A review and applicationsCarbon, 2014
- Polymer/carbon based composites as electromagnetic interference (EMI) shielding materialsMaterials Science and Engineering: R: Reports, 2013
- Lightweight and Flexible Graphene Foam Composites for High‐Performance Electromagnetic Interference ShieldingAdvanced Materials, 2013
- Phenolic resin-based composite sheets filled with mixtures of reduced graphene oxide, γ-Fe2O3 and carbon fibers for excellent electromagnetic interference shielding in the X-bandCarbon, 2012
- Single‐walled carbon nanotube/poly(methyl methacrylate) composites for electromagnetic interference shieldingPolymer Engineering & Science, 2009
- Synthesis of Electromagnetic Functionalized Barium Ferrite Nanoparticles Embedded in PolypyrroleThe Journal of Physical Chemistry B, 2008