Vertical seismic profiling with distributed acoustic sensing images the Rotliegend geothermal reservoir in the North German Basin down to 4.2 km depth
Preprint
- 12 October 2020
- preprint
- Published by Copernicus GmbH in EGUsphere
- Vol. 2020, 1-21
Abstract
We performed vertical seismic profiling at the Groß Schönebeck site in order to gain more detailed information on the structural setting and geometry of the geothermal reservoir, which is comprised of volcanic rocks and sediments of Lower Permian age. During the four-day survey, we acquired data for 61 source positions with the novel method of distributed acoustic sensing (DAS), using hybrid wireline fiber-optic sensor cables deployed in two 4.3 km deep wells. We show that wireline cable tension has a significant effect on data quality. While most of the recorded data has a very good signal-to-noise ratio, individual sections of the profiles are affected by characteristic coherent noise patterns. This ringing noise is a result of how the sensor cable is mechanically coupled to the borehole wall, and it can be suppressed to a large extent using suitable filtering methods. After conversion to strain rate, the DAS data exhibits a high similarity to the vertical component data of a conventional borehole geophone. Upgoing reflections are nevertheless recorded with opposite polarity, which needs to be taken into account during further seismic processing and interpretation. We derived accurate time-depth relationships, interval velocities, and corridor stacks from the recorded data. Based on integration with other well data and geological information, we show that the top of a porous and permeable sandstone interval of the geothermal reservoir can be identified by a positive reflection event. Overall, the sequence of reflection events shows a different character for both wells, which is explained by lateral changes in lithology. The top of the volcanic rocks has a somewhat different seismic response, and no stronger reflection event is obvious at the postulated top of the Carboniferous. The thickness of the volcanic rocks can therefore not be inferred from individual reflection events in the seismic data alone. The DAS method has enabled measurements at elevated temperatures up to 150 °C over extended periods and has led to significant time and cost savings compared to deployment of a conventional geophone chain.Keywords
All Related Versions
- Published version: Solid Earth, 12 (2), 521.
Funding Information
- Horizon 2020 Framework Programme
This publication has 21 references indexed in Scilit:
- Vertical seismic profiling using a daisy‐chained deployment of fibre‐optic cables in four wells simultaneously – Case study at the Ketzin carbon dioxide storage siteGeophysical Prospecting, 2018
- The effect of gauge length on axially incident P‐waves measured using fibre optic distributed vibration sensingGeophysical Prospecting, 2016
- Field testing of modular borehole monitoring with simultaneous distributed acoustic sensing and geophone vertical seismic profiles at Citronelle, AlabamaGeophysical Prospecting, 2015
- Evaluation of three exploitation concepts for a deep geothermal system in the North German BasinComputers & Geosciences, 2015
- Vertical seismic optical profiling on wireline logging cableGeophysical Prospecting, 2014
- Distributed acoustic sensing for reservoir monitoring with vertical seismic profilingGeophysical Prospecting, 2014
- Tomographic P wave velocity and vertical velocity gradient structure across the geothermal site Groß Schönebeck (NE German Basin): Relationship to lithology, salt tectonics, and thermal regimeJournal of Geophysical Research: Solid Earth, 2010
- Cyclic waterfrac stimulation to develop an Enhanced Geothermal System (EGS)—Conceptual design and experimental resultsGeothermics, 2010
- The stress regime in a Rotliegend reservoir of the Northeast German BasinInternational Journal of Earth Sciences, 2008
- Tutorial: Phase, polarity and the interpreter's waveletFirst Break, 2002