Microwave-based CO2 desorption for enhanced direct air capture: experimental validation and techno-economic perspectives
Open Access
- 16 February 2024
- journal article
- research article
- Published by IOP Publishing in Environmental Research Letters
- Vol. 19 (3) , 034002
Abstract
This study explores the feasibility and potential techno-economic advantages of employing microwaves for direct air capture (DAC) applications. The experimental setup resembles an industrial-scale microwave system, utilizing a single-mode applicator and zeolite 13x beads arranged in a panel configuration. This configuration essentially represents a miniaturized version of a potential DAC plant based on microwaves. The results demonstrate that microwave irradiation rapidly and efficiently desorbs the CO2 from sorbents with approximately 90% desorption achieved in 10 min—substantially shorter than conventional conduction-based methods. The desorption process occurred at a low temperature of about 50 °C, in contrast to nearly 120 °C in conventional bulk heating, due to selective heating near CO2 binding sites. Our results support that desorption duration and temperature could be further reduced by applying more uniform heating while intensifying the selective process. Based on our research and recent literature, we propose three key techno-economic advantages of designing a DAC system with microwaves that are unattainable by the conventional approach. A reduced regeneration time could allow for a more compact system design while maintaining throughput. The selectivity of microwave absorption could drastically reduce energy demand, bringing it close to the sorbent’s thermodynamic energy limits. Furthermore, the low-temperature process could inhibit the thermal degradation of amines on the sorbents, which is unavoidable in conventional processes. Potential resonant CO2 desorption by forming nonthermal plasma (NTP) is discussed. Our research highlights the feasibility and significance of employing advanced regeneration methods in the development of next-generation DAC systems.Keywords
This publication has 30 references indexed in Scilit:
- Energy-efficient and water-saving sorbent regeneration at near room temperature for direct air captureMaterials Today Sustainability, 2023
- Technical advances, barriers, and solutions in microwave—assisted technology for industrial processingChemical Engineering Research and Design, 2022
- Heat and mass transfer of temperature–vacuum swing desorption for CO2 capture from airChemical Engineering Journal, 2016
- Amine‐functionalized mesoporous silica: A material capable of CO2 adsorption and fast regeneration by microwave heatingAIChE Journal, 2015
- CO2 desorption via microwave heating for post-combustion carbon captureMicroporous and Mesoporous Materials, 2014
- Development of a computer simulation model for processing food in a microwave assisted thermal sterilization (MATS) systemJournal of Food Engineering, 2013
- Microwave assisted vacuum regeneration for CO2 capture from wet flue gasAdsorption, 2013
- Adsorbents regeneration under microwave irradiation for dehydration and volatile organic compounds gas treatmentChemical Engineering Journal, 2010
- Microwave regeneration of zeolites in a 1 meter columnAIChE Journal, 2009
- Intensification of desorption processes by use of microwaves—An overview of possible applications and industrial perspectivesChemical Engineering and Processing - Process Intensification, 2009