Anhydrous Phosphoric Acid Functionalized Sintered Mesoporous Silica Nanocomposite Proton Exchange Membranes for Fuel Cells
- 30 October 2013
- journal article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 5 (21) , 11240-11248
Abstract
A novel inorganic proton exchange membrane based on phosphoric acid (PA)-functionalized sintered mesoporous silica, PA-meso-silica, has been developed and investigated. After sintering at 650 °C, the meso-silica powder forms a dense membrane with a robust and ordered mesoporous structure, which is critical for retention of PA and water within the porous material. The PA-meso-silica membrane achieved a high proton conductivity of 5 × 10(-3) to 5 × 10(-2) S cm(-1) in a temperature range of 80-220 °C, which is between 1 and 2 orders of magnitudes higher than a typical membrane Nafion 117 or polybenzimidazole (PBI)/PA in the absence of external humidification. Furthermore, the PA-meso-silica membranes exhibited good chemical stability along with high performance at elevated temperatures, producing a peak power density of 632 mW cm(-2) using a H2 fuel at 190 °C in the absence of external humidification. The high membrane proton conductivity and excellent fuel cell performance demonstrate the utility of PA-meso-silica as a new class of inorganic proton exchange membranes for use in the high-temperature proton exchange membrane fuel cells (PEMFCs).Keywords
This publication has 66 references indexed in Scilit:
- Methanol crossover reduction by Nafion modification via layer-by-layer self-assembly techniquesColloids and Surfaces A: Physicochemical and Engineering Aspects, 2012
- A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental researchApplied Energy, 2011
- Recent developments in proton exchange membranes for fuel cellsEnergy & Environmental Science, 2008
- Investigation of Low-Temperature Proton Transport in Nafion Using Direct Current Conductivity and Differential Scanning CalorimetryJournal of the Electrochemical Society, 2006
- Mechanisms of Ion and Water Transport in Perfluorosulfonated Ionomer Membranes for Fuel CellsThe Journal of Physical Chemistry B, 2004
- Approaches and Recent Development of Polymer Electrolyte Membranes for Fuel Cells Operating above 100 °CChemistry of Materials, 2003
- DMFCs: From Fundamental Aspects to Technology DevelopmentFuel Cells, 2001
- FUEL CELLS: Reaching the Era of Clean and Efficient Power Generation in the Twenty-First CenturyAnnual Review of Energy and the Environment, 1999
- Thermal Stability of Nafion® in Simulated Fuel Cell EnvironmentsJournal of the Electrochemical Society, 1996
- Experimental Determination of the Transport Number of Water in Nafion 117 MembraneJournal of the Electrochemical Society, 1992