Mesoporous carbon from biomass walnut shell waste for energy storage applications: a green approach for waste to supercapacitor
- 14 April 2026
- journal article
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (15) , 155906
Abstract
The rising need for sustainable energy storage solutions has driven the investigation of carbon materials derived from biomass as environmentally friendly alternatives to traditional electrodes. Hence, we introduce an eco-friendly synthesis method to produce mesoporous activated carbon (WSAC) from walnut shell waste (WS) using a chemical-free hydrothermal process, addressing both waste utilization and renewable energy storage requirements. The WS precursor underwent cleaning, drying, and charring at 200 °C, followed by a hydrothermal treatment at 200 °C for 3 h to produce WSAC for supercapacitor applications. The WSAC exhibits a mesoporous structure, high active sites with improved electrochemical properties. Raman spectra analysis confirmed that WASC is composed of sp 3 hybridised graphite band (G band) and a high order of defective sites (D band) in the structure (I D /I G = 1.24). The WSAC exhibits a multilayer structure stacker together with a moderate specific surface area (138.32 m 2 g −1 ; BJH surface area is 25.589 m 2 g −1 ) and possess mesoporous nature (pore size is ∼2.34 nm). Additionally, TGA confirms thermal stability up to 500 °C, highlighting the material’s durability for practical applications. The WSAC shows the combination of pseudo-capacitance and electrical double-layer capacitance (EDLC) in three different electrolytes, including acidic (H 2 SO 4 , HNO 3 ), neutral (Na 2 SO 4 , KCI), and alkaline (NaOH, KOH) electrolytes. Interestingly, the WSAC electrode in alkaline electrolyte (0.5 M NaOH) at 1.4 V shows high areal specific capacitances of 4.17 F g −1 and high capacitance retention (63% for 3000 cycles), exhibiting superior performance than acidic and neutral electrolyte, related to a combined effect of EDLC and pseudo-capacitance mechanism This study demonstrates a cost-effective and environmentally friendly synthesis route to convert biomass waste into scalable, high performance electrodes for supercapacitor applications. It also contributes to the advancement of biomass-derived carbon materials for energy storage, aligning with global sustainability goals.Keywords
This publication has 53 references indexed in Scilit:
- Biomass waste from walnut shell for pollutants removal and energy storage: a review on waste to wealth transformationAdsorption, 2024
- Pseudocapacitive Storage in Molybdenum Oxynitride Nanostructures Reactively Sputtered on Stainless‐Steel Mesh Towards an All‐Solid‐State Flexible SupercapacitorSmall, 2023
- Recent development in the application of walnut processing by-products (walnut shell and walnut husk)Biomass Conversion and Biorefinery, 2023
- Analysis of gas adsorption and pore development of microporous-mesoporous activated carbon based on GCMC simulation and a surface defect modelJournal of Porous Materials, 2023
- Biomass-derived porous activated carbon nanofibers from Sapindus trifoliatus nut shells for high-performance symmetric supercapacitor applicationsCarbon Letters, 2021
- Biomass-Derived Carbon Materials for High-Performance Supercapacitors: Current Status and PerspectiveElectrochemical Energy Reviews, 2021
- Achieving High Voltage and Excellent Rate Capability Supercapacitor Electrodes Derived From Bio‐renewable and Sustainable ResourceChemistrySelect, 2020
- Impedance Biosensing atop MoS2 Thin Films with Mo−S Bond Formation to Antibody Fragments Created by Disulphide Bond ReductionElectroanalysis, 2019
- A Simple Route to Porous Graphene from Carbon Nanodots for Supercapacitor ApplicationsAdvanced Materials, 2018
- Walnut shell derived porous carbon for a symmetric all-solid-state supercapacitorApplied Surface Science, 2017