FORCES INDUCED ON A VERTICAL BREAKWATER BY INCIDENT OBLIQUE WAVES
Open Access
- 14 December 2012
- journal article
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- Vol. 1 (33) , 14
Abstract
Over the last years Navier-Stokes numerical models have been developed to accurately simulate wave interaction with all kinds of coastal structures, focusing on both functionality and stability of coastal structures. Although several models have been used to simulate wave interaction with coastal structures in two dimensions (2DV) there are a vast number of three-dimensional effects that need to be investigated in order to improve the design. In this paper a new model called IH-FOAM has been applied to study a vertical breakwater at prototype scale. As a first attempt of validation, the model has been used to simulate a regular wave train generated with a relative angle with the breakwater inducing three-dimensional wave patterns not only seaward the structure due to reflection but also generating an overtopping discharge variation along the breakwater trunk. Pressure laws and overtopping discharge at three different cross-sections along the structure have been studied. The pressure laws have been compared with classical Goda's formulation. Although, the numerical model predictions are in accordance with Goda's calculations, a clear three-dimensional variability of wave-induced pressure has been observed. Moreover, an additional study has been performed calculating pressure laws on the side-wall at the breakwater head. Large three-dimensional effects are detected from the simulations due to the flow separation at that area. Overtopping model predictions have been compared with Overtopping Manual calculations showing very close values along the trunk. However, lower overtopping discharge values are observed at the breakwater head. This paper is a preliminary work to show the range of applicability of a three-dimensional Navier-Stokes model to study wave interaction with a vertical breakwater under the action of an oblique wave train.Keywords
This publication has 11 references indexed in Scilit:
- Three-dimensional interaction of waves and porous coastal structuresCoastal Engineering, 2012
- Three-dimensional interaction of waves and porous coastal structuresCoastal Engineering, 2012
- Reynolds averaged Navier–Stokes modelling of long waves induced by a transient wave group on a beachProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2010
- Numerical modelling of short- and long-wave transformation on a barred beachCoastal Engineering, 2010
- Numerical analysis of wave loads for coastal structure stabilityCoastal Engineering, 2009
- Wave interaction with low-mound breakwaters using a RANS modelOcean Engineering, 2008
- Numerical analysis of wave overtopping of rubble mound breakwatersCoastal Engineering, 2008
- Wave-Induced Mean Magnitudes in Permeable Submerged BreakwatersJournal of Waterway, Port, Coastal, and Ocean Engineering, 2001
- Review of Multidirectional Active Wave Absorption MethodsJournal of Waterway, Port, Coastal, and Ocean Engineering, 2000
- Time-Dependent Numerical Code for Extended Boussinesq EquationsJournal of Waterway, Port, Coastal, and Ocean Engineering, 1995