Upcycling PET and Eggshell Waste Into BHET ‐Based Unsaturated Polyester/Hydroxyapatite Composites
- 13 October 2025
- journal article
- Published by Wiley in Polymer Engineering & Science
- Vol. 65 (12) , 7027-7042
Abstract
This study reports the preparation and characterization of composites based on unsaturated polyester (UP) resins derived from post‐consumer PET and reinforced with hydroxyapatite (Hap) obtained from eggshell waste. Hap was synthesized via calcination and phosphate reaction, exhibiting characteristic FTIR and XRD features and a Ca/P ratio indicative of Ca‐rich phases. BHET, a PET glycolysis product, was used as a monomeric precursor to synthesize UPs with 0, 15, and 30 wt% BHET content. These resins showed similar molecular weights and conversions, with nuclear magnetic resonance confirming BHET incorporation and revealing its impact on side reactions. All UPs displayed Newtonian behavior when dissolved in N‐vinylpyrrolidone (VP), indicating good processability. UP/VP/HAp pastes cured with benzoyl peroxide exhibited typical exothermic profiles, and the curing rate decreased slightly at higher BHET content, resulting in maximum temperatures of 71°C–76°C and setting times of 200–260 s. FTIR analysis showed ~89% overall double bond conversion. Thermal analysis revealed low glass transition temperatures (60°C–64°C), while mechanical testing showed composites with tunable properties: elongation at fracture ranging from 5.7% to 9.4%, fracture strength remained constant (~1.6–1.7 MPa), and compressive strength varied from 3.6 to 7.0 MPa. These findings demonstrate the feasibility of integrating PET and eggshell waste into composite materials for in situ curing applications; however, further optimization of setting time and mechanical properties is required to enhance their potential for biomedical use.Keywords
Funding Information
- Centro de Investigación en Química Aplicada (6755)
This publication has 51 references indexed in Scilit:
- Bioactivity and Mechanical Performance of Centrifugally Spun Poly(D,L‐Lactide)/Poly(3‐Hydroxybutyrate) Submicrometric Fibers Containing Zinc Oxide and Hydroxyapatite NanostructuresJournal of Applied Polymer Science, 2025
- Toward new applications of terpenes in polymeric materials: Synthesis and characterization of myrcene‐modified unsaturated polyester resinsJournal of Applied Polymer Science, 2024
- Physical and mechanical properties of unsaturated polyester resin matrix from recycled PET (based PG) with corn straw fiberJournal of Applied Polymer Science, 2021
- Bio‐inspired “green” nanocomposite using hydroxyapatite synthesized from eggshell waste and soy proteinJournal of Applied Polymer Science, 2016
- Synthesis and Characterization of UV‐Curable Resins from the Glycolysis of PET: Vinyl Ether/Maleate UV‐Curing SystemMacromolecular Chemistry and Physics, 2007
- Kinetics of the curing reaction of unsaturated polyester resins catalyzed with new initiators and a promoterJournal of Applied Polymer Science, 2006
- A Novel Phosphorus‐Containing Polymer as a Highly Effective Flame RetardantMacromolecular Materials and Engineering, 2004
- Unsaturated polyester resins based on recycled PET: Preparation and curing behaviorJournal of Applied Polymer Science, 2001
- Analysis of a vinyl pyrrolidone/poly(propylene fumarate) resorbable bone cementJournal of Biomedical Materials Research, 1995
- Unsaturated polyesters from PET waste: Kinetics of polycondensationJournal of Applied Polymer Science, 1987