Performance evaluation of silane crosslinking of metallocene‐based polyethylene–octene elastomer
Authors:
- 28 September 2006
- journal article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 102 (5) , 5057-5061
Abstract
Vinyl trimethoxysilane (VTMS) was grafted onto metallocene‐based polyethylene–octene elastomer (POE) using a free‐radical reaction of VTMS and dicumyl peroxide as an initiator, and then the grafted POE was crosslinked in the presence of water. The effects of VTMS concentration on crystallization behavior, mechanical properties, and thermal properties of POE before and after crosslinking were studied in this article. Multiple melting behaviors were found for POE after silane crosslinking by using DSC measurement. Degree of crystallization of silane‐crosslinked POE decreases from 18.0 to 14.3%, with increase of VTMS from 0 to 2.0 phr. Tensile strength of silane‐crosslinked POE reaches a maximum of 28.4 MPa when concentration of VTMS is 1.5 phr, while elongation at break is 487%. TG shows that the temperature of 10% weight loss for pure POE is 405°C, while for crosslinked POE with addition of 2.0 phr VTMS the value comes to 452°C, indicating that crosslinking significantly help improve the thermal stability of POE. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5057–5061, 2006Keywords
This publication has 17 references indexed in Scilit:
- Silane grafting and crosslinking of ethylene–octene copolymerEuropean Polymer Journal, 2005
- Influence of long‐chain branching on the rheological behavior of polyethylene in shear and extensional flowPolymer Engineering & Science, 2005
- Preparation and properties of metallocene ethylene copolymer crosslinked by vinyltrimethoxysilanePolymer International, 2005
- Non-isothermal crystallization kinetics of silane crosslinked polyethylenePolymer Testing, 2005
- Comparison in processability and mechanical and thermal properties of ethylene–octene copolymer crosslinked by different techniquesJournal of Applied Polymer Science, 2004
- Changes in properties of silane–water crosslinked metallocene ethylene‐octene copolymer after prolonged crosslinking timeJournal of Applied Polymer Science, 2004
- Thermomechanical behavior of metallocene ethylene-α-olefin copolymersEuropean Polymer Journal, 2002
- Power-law numerical solution for post-die extrusion of plastic pipePolymer-Plastics Technology and Engineering, 2002
- STUDY ON THE GRAFT REACTION OF MALEIC ANHYDRIDE ONTO METALLOCENE-BASED POLYETHYLENE–OCTENE ELASTOMERPolymer-Plastics Technology and Engineering, 2002
- Influence of interfacial adhesion on toughening of polyethylene-octene elastomer/nylon 6 blendsJournal of Applied Polymer Science, 1998