Solid state auto-transformer concept for multi-pulse rectifiers

Authors:

Abstract
Typical non-isolated multi-pulse rectifier configurations in applications such as aircrafts, ships, etc. consist of a low frequency (LF) auto-transformer, followed by 3-phase diode bridges at the interface of the AC power source. This paper proposes a higher frequency (HF) solid state auto-transformer (SSAT) based interface that can serve as a retrofit replacement to existing bulky LF auto-transformers in such applications and reduce the system weight/volume. In the proposed approach, the LF AC voltages are converted to HF AC voltages that are applied to the primary windings of higher frequency auto-transformers. The secondary windings from the SSAT are connected in a certain `zig-zag' arrangement to cause a net phase-shift in the voltages, which are fed to the inputs of 3-phase diode bridge modules as in a typical multi-pulse rectifier. Usage of an open-loop square wave pulse-width modulation (PWM) for the switches makes this approach simple to implement. This paper validates the proposed concept using modeling, simulation, and preliminary experiments from a scaled down laboratory prototype. Overall, the SSAT approach improves power density of the front-end auto-transformer, while maintaining similar source current quality and efficiency as in conventional LF auto-transformer based multi-pulse rectifiers.