Utilization of Stockwell Transform, Support Vector Machine and D-STATCOM for the Identification, Classification and Mitigation of Power Quality Problems
Authors:
- Epaphros MengistuEMEpaphros Mengistu
- Baseem KhanBaseem Khan
- Yazeed QasaymehYQYazeed Qasaymeh
- Ali S. AlghamdiAAAli S. Alghamdi
- Muhammad ZubairMZMuhammad Zubair
- Ahmed Bilal AwanAhmed Bilal Awan
- Muhammad Gul Bahar AshiqMAMuhammad Gul Bahar Ashiq
- Samia Gharib AliSASamia Gharib Ali
- Cristina Mazas Pérez-OleagaCPCristina Mazas Pérez-Oleaga
Open Access
- 30 March 2023
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 15 (7) , 6007
Abstract
Power Quality (PQ) has become a significant issue in power networks. Power quality disturbances must be precisely and appropriately identified. This activity involves identifying, classifying, and mitigating power quality problems. A case study of the Awada industrial zone in Ethiopia is taken into consideration to show the practical applicability of the proposed work. It is found that the current harmonic distortion levels exceed the restrictions with a maximum percentage Total Harmonic Distortion of Current (THDI) value of up to 23.09%. The signal processing technique, i.e., Stockwell Transform (ST) is utilized for the identification of power quality issues, and it covers the most important and common power quality issues. The Support Vector Machine (SVM) method is used to categorize power quality issues, which enhances the classification procedure. The ST scored better in terms of accuracy than the Wavelet Transform (WT), Fourier Transform (FT), and Hilbert Transform (HT), obtaining 97.1%, as compared to 91.08%, 88.91%, and 86.8%, respectively. The maximum classification accuracy of SVM was 98.3%. To lower the current level of harmonic distortion in the industrial sector, a Distribution Static Compensator (D-STATCOM) is developed in the current control mode. To evaluate the performance of the D-STATCOM, the performance of the distribution network with and without D-STATCOM is simulated. The simulation results show that THDI is reduced to 4.36% when the suggested D-STATCOM is applied in the system.Keywords
Funding Information
- Deputyship for Research and Innovation, Ministry of Education in Saudi Arabia (IFP-2022-35)
This publication has 25 references indexed in Scilit:
- Power Quality Disturbance Feature Selection and Pattern Recognition Based on Image Enhancement TechniquesIEEE Access, 2019
- A new optimal feature selection scheme for classification of power quality disturbances based on ant colony frameworkApplied Soft Computing, 2019
- Hybrid soft computing approach based on clustering, rule mining, and decision tree analysis for customer segmentation problem: Real case of customer-centric industriesApplied Soft Computing, 2018
- Power‐quality disturbance recognition based on time‐frequency analysis and decision treeIET Generation, Transmission & Distribution, 2018
- Event-Triggered-Based Distributed Cooperative Energy Management for Multienergy SystemsIEEE Transactions on Industrial Informatics, 2018
- Real‐time cross‐correlation‐based technique for detection and classification of power quality disturbancesIET Generation, Transmission & Distribution, 2017
- The performance improvement of dynamic voltage restorer based on bidirectional dc–dc converterElectrical Engineering, 2016
- Detection and classification of single and combined power quality disturbances using fuzzy systems oriented by particle swarm optimization algorithmElectric Power Systems Research, 2010
- Detection and Classification of Multiple Power-Quality Disturbances With Wavelet Multiclass SVMIEEE Transactions on Power Delivery, 2008
- Localization of the complex spectrum: the S transformIEEE Transactions on Signal Processing, 1996