A High Step-Up Converter With a Voltage Multiplier Module for a Photovoltaic System
Authors:
- 4 September 2012
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 28 (6) , 3047-3057
Abstract
A novel high step-up converter is proposed for a front-end photovoltaic system. Through a voltage multiplier module, an asymmetrical interleaved high step-up converter obtains high step-up gain without operating at an extreme duty ratio. The voltage multiplier module is composed of a conventional boost converter and coupled inductors. An extra conventional boost converter is integrated into the first phase to achieve a considerably higher voltage conversion ratio. The two-phase configuration not only reduces the current stress through each power switch, but also constrains the input current ripple, which decreases the conduction losses of metal-oxide-semiconductor field-effect transistors (MOSFETs). In addition, the proposed converter functions as an active clamp circuit, which alleviates large voltage spikes across the power switches. Thus, the low-voltage-rated MOSFETs can be adopted for reductions of conduction losses and cost. Efficiency improves because the energy stored in leakage inductances is recycled to the output terminal. Finally, the prototype circuit with a 40-V input voltage, 380-V output, and 1000- W output power is operated to verify its performance. The highest efficiency is 96.8%.Keywords
This publication has 35 references indexed in Scilit:
- High-Efficiency Modular High Step-Up Interleaved Boost Converter for DC-Microgrid ApplicationsIEEE Transactions on Industry Applications, 2011
- General Derivation Law of Nonisolated High-Step-Up Interleaved Converters With Built-In TransformerIEEE Transactions on Industrial Electronics, 2011
- Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected ApplicationsIEEE Transactions on Industrial Electronics, 2010
- Cascaded DC–DC Converter Photovoltaic Systems: Power Optimization IssuesIEEE Transactions on Industrial Electronics, 2010
- Design and Analysis of a Grid-Connected Photovoltaic Power SystemIEEE Transactions on Power Electronics, 2009
- Interleaved High Step-Up Converter With Winding-Cross-Coupled Inductors and Voltage Multiplier CellsIEEE Transactions on Power Electronics, 2009
- A High-Efficiency High Step-Up Converter With Low Switch Voltage Stress for Fuel-Cell System ApplicationsIEEE Transactions on Industrial Electronics, 2009
- High-Performance Stand-Alone Photovoltaic Generation SystemIEEE Transactions on Industrial Electronics, 2008
- Interleaved Boost Converter With Intrinsic Voltage-Doubler Characteristic for Universal-Line PFC Front EndIEEE Transactions on Power Electronics, 2007
- Optimization of Perturb and Observe Maximum Power Point Tracking MethodIEEE Transactions on Power Electronics, 2005