Probing influence of welding current on weld quality in two wire tandem submerged arc welding of HSLA steel
Authors:
- 1 February 2010
- journal article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 15 (2) , 111-116
Abstract
Two wire tandem submerged arc welding (SAW-T) involves application of two electrode wires to form a single weld pool with one wire leading the other along the weld interface. Realisation of the influences of the lead and trail wire currents on the weld bead morphology and the weld strength are important in SAW-T. The authors here present an experimental and computational investigation on SAW-T process. The concept of central composite rotatable design is followed for designing the experimental trials. The final weld width and the reinforcement height showed greater sensitivity to trail current while the penetration was influenced primarily by lead current. A three-dimensional heat transfer analysis is carried out using finite element method. The computed weld profiles were validated with the corresponding measured results. The computed cooling rates showed a decline with higher welding current and, the corresponding sample welds showed reduced acicular ferrite percentage and lower weld strength.Keywords
This publication has 20 references indexed in Scilit:
- Artificial neural networks and acoustic emission applied to stability analysis in gas metal arc weldingScience and Technology of Welding and Joining, 2009
- Neurowavelet packet analysis based on current signature for weld joint strength prediction in pulsed metal inert gas welding processScience and Technology of Welding and Joining, 2008
- Application of grey relational analysis to determine welding parameters for Nd:YAG laser GMA hybrid welding of aluminium alloyScience and Technology of Welding and Joining, 2008
- Fuzzy rule based approach for predicting weld bead geometry in gas tungsten arc weldingScience and Technology of Welding and Joining, 2008
- Process-Controlled Microstructure and Cast Morphology of Dendrite in Pulsed-Current Gas-Metal Arc Weld Deposits of Aluminum and Al-Mg AlloyMetallurgical and Materials Transactions A, 2007
- Some investigations on microstructure and mechanical properties of submerged arc welded HSLA steel jointsThe International Journal of Advanced Manufacturing Technology, 2006
- Prediction of multiwire submerged arc weld bead shape using neural network modellingScience and Technology of Welding and Joining, 2002
- Physical Metallurgy of Pulsed Current Submerged Arc Weldin Steels.ISIJ International, 1998
- Modeling of fundamental phenomena in weldsModelling and Simulation in Materials Science and Engineering, 1995
- Physical processes in fusion weldingReviews of Modern Physics, 1995