Effect of Gas Environment on Friction Behavior and Tribofilm Formation of PEEK/Carbon Fiber Composite
Authors:
- 1 March 2013
- journal article
- research article
- Published by Taylor & Francis in Tribology Transactions
- Vol. 56 (4) , 607-614
Abstract
This study investigated the friction and wear behaviors of polyetheretherketone composites containing carbon fibers (PEEK-CF) sliding against stainless steel in terms of their dependencies on gas environments. Sliding tests with a block-on-ring apparatus were conducted in humid/dry air and dry nitrogen at normal temperature and nitrogen at cryogenic temperature of 113 K. Friction and wear significantly decreased when sliding occurred in low-humidity, low-oxygen, and low-temperature environments. The friction coefficient, initially 0.25 in ambient humid air, decreased to below 0.10 in the dry nitrogen environment and 0.03 in nitrogen at 113 K. Microscopic observations, surface roughness measurements, and surface composition analysis of worn surfaces were conducted after the sliding tests. After sliding in humid air, the surface roughness of the PEEK-CF block was increased from its initial value by adhesions of large wear particles. However, the surface roughness of the block decreased due to the formations of tribofilms that were micrometers thick and composed of fine wear particles of polymer and carbon fibers after sliding in dry nitrogen. X-ray photoelectron spectroscopy analysis and the Raman spectroscopy analysis indicated increased carbon content with graphite structures on the worn surface after sliding in dry nitrogen. Consequently, it was considered that PEEK-CF changed its wear process in the dry nitrogen environment and formed a smooth surface with carbon particles containing graphite, which is thought to be advantageous in reducing friction.Keywords
This publication has 23 references indexed in Scilit:
- Investigation of the Tribological Behavior of Polytetrafluoroethylene at Cryogenic TemperaturesTribology Transactions, 2008
- Tribological results of PEEK nanocomposites in dry sliding against 440C in various gas environmentsWear, 2007
- Tribological behavior of PEEK components with compositionally graded PEEK/PTFE surfacesWear, 2007
- Processing and Tribological Properties of SiC/Carbon Short Fiber CompositesJournal of the Ceramic Society of Japan, 2006
- Friction and Wear of Carbon Fibre Filled Polymer Composites at Room and Low TemperaturesMaterialwissenschaft und Werkstofftechnik, 2004
- Wear of PEEK composites related to their mechanical performancesTribology International, 2004
- The effect of controlled surface topographical features on the unlubricated transfer and wear of PEEKWear, 1997
- Dry sliding friction and wear of short carbon-fiber-reinforced polyetheretherketone (PEEK) at elevated temperaturesWear, 1997
- Influence of adsorbed gases on the surface energy of graphite: consequences on the friction behaviourThin Solid Films, 1995
- On sliding friction and wear of PEEK and its compositesWear, 1995