Compact flexible and reconfigurable antenna using screen‐printed vanadium dioxide switch for wireless local area network and 5G electronic devices
- 5 February 2022
- journal article
- research article
- Published by Hindawi Limited in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 32 (5) , e23103
Abstract
This article proposes an additive manufacturing compact (30 × 36 × 0.125 mm3), flexible, and reconfigurable antenna with the ability to switch between wideband and dual-band for wireless electronic devices used in the fifth generation (5G) systems and wireless local area network (WLAN) systems. The antenna consists of a folded branch line and an inverted L-shape branch as radiator, and a slot on the ground plane. A vanadium dioxide (VO2) switch is screen-printed on the folded branch line to reconfigure the operation frequencies. The antenna is optimized to operate for a wide bandwidth between 2.46 and 4.3 GHz when the VO2 switch is in the “OFF” state. The antenna exhibits dual narrow-bands at frequencies of 2.4 and 5.2 GHz when the VO2 switch is heated up to 85°C or when a DC current of 50 mA is applied. Simulation and measurement show that the performance of the antenna remains relatively stable under different bending conditions in both the “ON” and “OFF” states of the switch. The operating frequencies can be independently controlled, and a guideline is discussed to design the antenna for other frequencies.Keywords
This publication has 44 references indexed in Scilit:
- Fabrication of Fully Inkjet-Printed Vias and SIW Structures on Thick Polymer SubstratesIEEE Transactions on Components, Packaging and Manufacturing Technology, 2016
- Vanadium Oxide Thin-Film Variable Resistor-Based RF SwitchesIEEE Transactions on Electron Devices, 2015
- Inkjet Printing of Multilayer Millimeter-Wave Yagi-Uda Antennas on Flexible SubstratesIEEE Antennas and Wireless Propagation Letters, 2015
- A Compact Kapton-Based Inkjet-Printed Multiband Antenna for Flexible Wireless DevicesIEEE Antennas and Wireless Propagation Letters, 2015
- Reconfigurable Bowtie Antenna Using Metal-Insulator Transition in Vanadium DioxideIEEE Antennas and Wireless Propagation Letters, 2015
- Frequency-Reconfigurable Bow-Tie Antenna for Bluetooth, WiMAX, and WLAN ApplicationsIEEE Antennas and Wireless Propagation Letters, 2014
- An Inkjet-Printed Buoyant 3-D Lagrangian Sensor for Real-Time Flood MonitoringIEEE Transactions on Antennas and Propagation, 2014
- Cavity backed annular slot ring antenna with reconfigurable slots using VO22013
- Paper-based inkjet-printed ultra-wideband fractal antennasIET Microwaves, Antennas & Propagation, 2012
- Reconfigurable slotted microstrip patch using VO22012