Limits to the strength of super- and ultrahard nanocomposite coatings
Authors:
- 18 March 2003
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 21 (3) , 532-544
Abstract
Hertzian analysis of the nonlinear elastic response upon unloading provides analytical solutions that were used to verify if the hardness values measured on the super- and ultrahard coatings are self-consistent. The analytical solutions were also used to estimate the tensile strength of the coatings. The highest tensile stress occurs at the periphery of the contact between the coating and the indenter and, in the case of ultrahard coatings, it can reach values in the range of tens of Gpa, thus giving an estimate of their tensile strength. The results show that the tensile strength of the superhard nanocomposites reaches an appreciable fraction of the ideal cohesive strength that is predicted on the basis of the universal binding energy relation. The data are compared with finite element computer modeling in order to obtain a deeper insight into the complex problems. Reliable values of the hardness can be obtained if coatings of a thickness greater than 8 μm are used and the load-independent values are measured at sufficiently large indentation depths of greater than 0.3 μm.Keywords
This publication has 30 references indexed in Scilit:
- Determination of mechanical film properties of a bilayer system due to elastic indentation measurements with a spherical indenterThin Solid Films, 2000
- Composition, nanostructure and origin of the ultrahardness in nc-TiN/a-Si3N4/a- and nc-TiSi2 nanocomposites with HV=80 to ≥105 GPaSurface and Coatings Technology, 2000
- Present and possible future applications of superhard nanocomposite coatingsSurface and Coatings Technology, 2000
- Structure and properties of hard and superhard Zr–Cu–N nanocomposite coatingsMaterials Science and Engineering: A, 2000
- Nanocomposites nc-TiN/a-Si3N4/a- and nc-TiSi2 with Hardness Exceeding 100 GPa and High Fracture ToughnessMRS Proceedings, 1999
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- An explanation of the indentation size effect in ceramicsPhilosophical Magazine Letters, 1989
- A method for interpreting the data from depth-sensing indentation instrumentsJournal of Materials Research, 1986
- Universal features of the equation of state of metalsPhysical Review B, 1984
- Attempt to Design a Strong SolidPhysical Review B, 1970