Abstract
This study introduces an innovative approach to achieving circular polarization (CP) in a printed magneto-electric dipole (MED) antenna tailored for the 5G n77/n78 frequency bands (3.3–3.8 GHz). Traditional MED antennas are typically linearly polarized (LP), which limits their effectiveness in applications that require reliable signal integrity in multipath environments. To overcome this limitation, a systematic design methodology is presented that modifies the antenna’s polarization through asymmetric geometries and parasitic elements, all while maintaining a low profile and wideband performance. The design process unfolds through five key steps: (1) establishing a LP baseline with an impedance bandwidth of 3.28–5.48 GHz and a peak gain of 7.02 dBi; (2) introducing asymmetric patch subtractions to reduce the axial ratio (AR) to between 9 and 21 dB; (3) adding square slots and L-shaped stubs to further decrease the AR to 3–10 dB; (4) incorporating P-shaped parasitic elements to realize CP (with AR < 3 dB) over the 3.3–3.8 GHz range; and (5) implementing defective P-shaped elements to align the impedance bandwidth (3.29–4.0 GHz) with the CP bandwidth (3.32–3.8 GHz). Unlike conventional MED antennas, the proposed cutting-edge design in this work boasts remarkable improvements: achieves a CP peak gain of 4.94 dBic at 3.75 GHz and offers unidirectional right-hand circularly polarized (RHCP) radiation, with the possibility to switch to left-hand CP (LHCP) by mirroring the geometry. According to the measurements, the impedance bandwidth of 3.26–3.95 GHz (|S₁₁| < −10 dB), and the 3-dB axial ratio bandwidth 3.35–3.91 GHz confirms successful CP performance of this work for 5G applications. The compact design, wide bandwidth, and CP performance of the proposed antenna position it as a promising option for 5G systems.

This publication has 36 references indexed in Scilit: