Inter-Stage Dynamic Performance of an Axial Compressor of a Twin-Shaft Industrial Gas Turbine
Open Access
Abstract
In this study, the inter-stage dynamic performance of a multistage axial compressor is simulated through a semi-empirical model constructed in the Matlab Simulink environment. A semi-empirical 1-D compressor model developed in a previous study has been integrated with a 0-D twin-shaft gas turbine model developed in the Simulink environment. Inter-stage performance data generated through a high-fidelity design tool and based on throughflow analysis are considered for the development of the inter-stage modeling framework. Inter-stage performance data comprise pressure ratio at various speeds with nominal variable stator guide vane (VGV) positions and with hypothetical offsets to them with respect to the gas generator speed (GGS). Compressor discharge pressure, fuel flow demand, GGS and power turbine speed measured during the operation of a twin-shaft industrial gas turbine are considered for the dynamic model validation. The dynamic performance of the axial-compressor, simulated by the developed modeling framework, is represented on the overall compressor map and individual stage characteristic maps. The effect of extracting air through the bleed port in the engine center-casing on transient performance represented on overall compressor map and stage performance maps is also presented. In addition, the dynamic performance of the axial-compressor with an offset in VGV position is represented on the overall compressor map and individual stage characteristic maps. The study couples the fundamental principles of axial compressors and a semi-empirical modeling architecture in a complementary manner. The developed modeling framework can provide a deeper understanding of the factors that affect the dynamic performance of axial compressors.Keywords
Funding Information
- Siemens Energy, Lincoln,UK (1013292)
This publication has 29 references indexed in Scilit:
- Axial flow, multi-stage turbine and compressor modelsEnergy Conversion and Management, 2010
- Multi-stage axial flow compressors characteristics estimation based on system identificationEnergy Conversion and Management, 2008
- Matlab/Simulink-based simulation for digital-control system of marine three-shaft gas-turbineApplied Energy, 2005
- Axial compressor performance modelling with a quasi-one-dimensional approachProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2002
- Performance prediction of axial flow compressors using stage characteristics and simultaneous calculation of interstage parametersProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2001
- Identifying Faults in the Variable Geometry System of a Gas Turbine CompressorJournal of Turbomachinery, 2000
- Health Monitoring of Variable Geometry Gas Turbines for the Canadian NavyJournal of Engineering for Gas Turbines and Power, 1989
- Simulation of Surge Margin Changes Due to Heat Transfer Effects in Gas Turbine TransientsInternational Journal of Turbo & Jet-Engines, 1985
- Generalized Multistage Axial Compressor CharacteristicsJournal of Basic Engineering, 1961
- Overall and Stage Characteristics of Axial-flow CompressorsProceedings of the Institution of Mechanical Engineers, 1950