Electrically Conductive Epoxy Adhesives
Authors:
Open Access
- 10 February 2011
- Vol. 3 (1) , 427-466
Abstract
Conductive adhesives are widely used in electronic packaging applications such as die attachment and solderless interconnections, component repair, display interconnections, and heat dissipation. The effects of film thickness as functions of filler volume fraction, conductive filler size, shape, as well as uncured adhesive matrix viscosity on the electrical conduction behavior of epoxy-based adhesives are presented in this work. For this purpose, epoxy-based adhesives were prepared using conductive fillers of different size, shape, and types, including Ni powder, flakes, and filaments, Ag powder, and Cu powder. The filaments were 20 μm in diameter, and 160 or 260 μm in length. HCl and H3PO4 acid solutions were used to etch and remove the surface oxide layers from the fillers. The plane resistance of filled adhesive films was measured using the four-point method. In all cases of conductive filler addition, the planar resistivity levels for the composite adhesive films increased when the film thickness was reduced. The shape of resistivity-thickness curves was negative exponential decaying type and was modeled using a mathematical relation. The relationships between the conductive film resistivities and the filler volume fractions were also derived mathematically based on the experimental data. Thus, the effects of surface treatment of filler particles, the type, size, shape of fillers, and the uncured epoxy viscosity could be included empirically by using these mathematical relations based on the experimental data. By utilizing the relations we proposed to model thickness-dependent and volume fraction-dependent conduction behaviors separately, we were able to describe the combined and coupled volume fraction-film thickness relationship mathematically based on our experimental data.Keywords
This publication has 34 references indexed in Scilit:
- A comprehensive fatigue life predictive model for electronically conductive adhesive joints under constant-cycle loadingJournal of Adhesion Science and Technology, 2006
- A novel cumulative fatigue damage model for electronically-conductive adhesive joints under variable loadingJournal of Adhesion Science and Technology, 2006
- The effects of stress state, loading frequency and cyclic waveforms on the fatigue behavior of silver-filled electronically-conductive adhesive jointsJournal of Adhesion Science and Technology, 2006
- Correlation of silver migration to the pull out strength of silver wire embedded in an adhesive matrixIEEE Transactions on Components and Packaging Technologies, 2005
- Effects of various adherend surface treatments on fatigue behavior of joints bonded with a silver-filled electronically conductive adhesiveJournal of Adhesion Science and Technology, 2005
- Fatigue and failure behaviors of silver-filled electronically-conductive adhesive joints subjected to elevated humidityJournal of Adhesion Science and Technology, 2004
- Conduction Efficiency and Strength of Electronically Conductive Adhesive JointsThe Journal of Adhesion, 1996
- On the failure mechanism of anisotropically conductive adhesive joints on copper metallisationInternational Journal of Adhesion and Adhesives, 1996
- Reliability of Surface‐mounted Anisotropically Conductive Adhesive JointsCircuit World, 1993
- A review of the impact of conductive adhesive technology on interconnectionJournal of Electronics Manufacturing, 1992